Can’t connect to Mifi

Darren Clemons

Well-Known Member
I suddenly cannot connect to my mifi 7700 this morning. There was an update that came through on pre release that I ran.
I have turned WiFi off and back on again on the LS.
I even connected to the mifi and physically changed the WiFi name and password to something simple.
After doing so, the LS picked up the new name fine but when I input the password it gave me a “key mismatch” the 1st try. Then subsequent try’s it just gave me “failed” when trying to connect.
 

Darren Clemons

Well-Known Member
Yes I rebooted everything and pretty much just determined it was the update from this morning.
I just connected this same mifi to another LS Plus that I did NOT run the latest pre release update on and it connected immediately
 

Adam

Well-Known Member
5PLS
I updated this morning and connected to my jetpack okay. Do you have Auto (dhcp) checked under wifi configuration?
 

Darren Clemons

Well-Known Member
I updated this morning and connected to my jetpack okay. Do you have Auto (dhcp) checked under wifi configuration?
Yes I have DHCP checked.....and I also did a "forget".......

Seems I may just have a fluke thing. Matthew Sibole says he's seen this happen to one or two other customers of his.

This mifi that now won't connect to LS 1 will connect to any/all other wifi devices including LS 2.....

Every other wifi device will connect to LS 1.....except this mifi that I've used with it for 2 years.....very odd
 

Phillip Lancaster

Active Member
Yes I have DHCP checked.....and I also did a "forget".......

Seems I may just have a fluke thing. Matthew Sibole says he's seen this happen to one or two other customers of his.

This mifi that now won't connect to LS 1 will connect to any/all other wifi devices including LS 2.....

Every other wifi device will connect to LS 1.....except this mifi that I've used with it for 2 years.....very odd
Make sure you didn't accidentally block that LS on the mifi device. Ask me how I know.
 
Top