Nate The Surveyor
Well-Known Member
What version are you on? It looks like you have some color that we don't.
it is just awesome....Here is a couple of pics that show how repeatable the LS actually is. The white boxes on the right is the calculated corner that I intended to set 4 years ago.
View attachment 10427View attachment 10428The button to the left of the fix icon at the top left is the distance to the cluster averaged point that I shot in 4 years ago after setting the corner.
Matt, do you think the 2 engine better than the 6 with the standard LS?I am running pre-release Jfield .249. Should be the same that everyone else is using with RTPK. I am using a standard LS with 2 engine firmware with a T3 base.
So with a Triumph 2? That is what I have. I am using pre release with Gal and Beid turned on but they only get one band.I believe so if your base is transmitting all signals. I surveyed 163 acres today in some rough country all wooded in 5 hr 45 min. Now it was a resurvey and split into two tracts of a survey I did in 2016 but still.
Note above that Matt is using a T3.So with a Triumph 2?
Thanks Matt. This more or less confirms my gut hunch while playing around with the different settings....I did try all three (GPS-GLO 6p too) out on a wooded mountain road job to compare. It seemed the V6 multi was best.I do not think it would be beneficial to use the 2 engine firmware with the standard LS and a T2 even if you were using the single frequency Beidou and Galileo. The benefit of adding Galileo and Beidou will be using them in RTPK. However, while using RTK I think the standard V6 firmware will give better results.
Here's a little trick. Wind up 30 yards of 8lb test around a 60d nail. Add a bobber and and a hook and use that worm that was crawling around in the hole you dug at the last corner. Pitch it out there and nail it down. Check it on your way out.View attachment 10450
It was a rough spot but somehow I struggled through.