Matt Johnson

J-CORS is covered in the migration guide https://support.javad.com/index.php?attachments/j-field_v4_migration-pdf.13004/

Hello Matt, I did a localization on a new project today. I did have a red filter Icon. The left most funnel was red. I taped on it, a...

If there are points in the project and they are not visible in the point selection screen it is likely that you have a filtered enabled...

The antenna needs to be selected. How are you sending the file to DPOS?

A bug was found with the ARP offset not being applied correctly with the T3NR. It is currently fixed in the Testing version of J-Field.

"Prefer RTPK" option does RTK vs RTPK comparison. In case of both fixed solution it will prefer RTPK. But if RTPK is not fixed and RTK...

What service are you referring to? JCORS is free. To use the T2 as a base you would just need to connect the T2 to the internet...

Javad's JCORS is a NTRIP service. Did you ever try it?

The way I have it configure each engine has access to 2 signals from each satellite. This strategy makes it possible to have the most...

If you clear the NVRAM on the base all the radio parameters will get reset to default values and the radio will need to be configured...

I configure the RTK engine as shown in the document and in this screenshot.

I saw this issue on someone's LS and thought it was due to a hardware issue. The signals being broadcast by the base were not being...

I would think you would want at least a 50 watt panel to be able to produce enough power on shady days. I would pair it with a 40Ah 12V...

The OS image need to be loaded onto a SD card, not a USB drive. See the instructions at...

None of those changes will improve how the RTK engines are configured or help maximize signal variety and the speed at which the engines...