When I choose TCP it does not allow me to select a mountpoint. I can only select my mountpoint when using NTRIP. This is the way we have had is setup since we first received our LS in 2015.
Thanks Adam. I checked the settings and the NMEA period was set to 10 seconds so I changed it to 5 seconds with the same results. We upgraded to the LS+ a few months ago and haven' had any issues until now.
We were getting ready for the field today and can't seem to get our LS+ connected to our local CORS sites. This happens with both Wifi and LAN connections. RTN Status will say "SOCKET FAILED" then turns to "ERROR TIMEOUT". I've tried turning the RTN configuration on and off, disabling the...
We are having the same issues here in Michigan. I tried to upload a file, approx. 3 hours, from last Wednesday and it stated the same "Reference observations not available at the moment."
One of the corners on our Triumph-2 has cracked as well. The case with the rubber corners was installed on our Triumph-2 when it was sent in for the board upgrade.
We recently sent our Triumph-2 in for the Base Guard update. I am trying to set up the base and I cannot get the Triumph-2 to pair with the external radio (HPT435BT). How do I get the bluetooth to pair?
We had the same issue with the broken antenna connection at the ground plane a week or so ago. I disassembled the base of the antenna unsoldered and resoldered the cable back on. Then we secured the cable to the ground plane so we wouldn't have this issue again. I've checked the continuity...
I thought that I recently read a post of a future software update that would allow a user to occupy and start recording a point, pause the recording (while a car comes barreling down the road) and then be able to reoccupy the point and continue recording until required "standards" are met. Has...