Recent content by Ralph Dominguez

Jim, I used to send files to DPOS from my iPhone, but I have not done that in years. I now send files from my LS+ and that continues to be an option. Yesterday, I was forced to collect raw data in my T-3 and I wonder how one can send those files to DPOS. I have never tried this and have only...

Hi Jim, Yes, Mr. Glutting is gone. Not sure if I will miss him or not. I did not receive the sort of support that I feel I was due from Michael. Jim, you and took delivery of new Javad units. courtesy of Micheal Glutting in the offices of JAVAD GNSS in San Jose on the same morning back in 2014...

Thank you Andrew! I most likely will use the T-3 as a base as opposed to the T-2. The T-2 is slated to be a backup. Will the changes that you have made affect the connection to the T-3? Thank you again for your help. Ralph Dominguez

Michael, Units are set up and set to remote assistance.

Gentlemen, I just checked and, apparently, no one but Matt Johnson had any input on my situation. T-2 still not providing corrections. Frequency, Mod Band and Output Power all red. Is is possible to get the help I asked for yesterday? I am unable to use my system except to collect static data...

Matt, I see that the units appear to be connected. However I see that both the Frequency and Output Power shown in red in the lower left box on the screen. Are the T-2/HPT901BT capable of using the narrow band frequencies that are available? No corrections coming from the base according to...

I was having problems with range between my TLS+ and my T-3. It was learned that I was missing a particular antenna on the TLS+. I have on on order. As a fall back I tried to connect my TLS+ with my T-2 with no success. Mr. Sibole tried several settings but was not able to help me get the T-2...

Just thought I would chime in with personal experience. I have used my original TLS as an RTN rover for years. Most of the time with an SIM from AT&T. When AT&T service is poor, I use a Verizon Jetpack to connect via WiFi. My TLS was upgraded to to TLS+ recently and because I needed to toggle...

I am using iPhone JMT Ver 3.3.1 (build 11 20191001. I have made both Blue Tooth and hotspot connections to my T-3 (00089) and I can begin static data collection with the parameters that I set up. Once collection is completed, I cannot see the files on the T-3 in order to download them to my...

Hi Yuri, Any update on this issue?

Hi Yuri, Thanks for the reply. I had not checked the firmware and have now updated from 3.6.15 to 3.7.9. I applied the setup for WIFI adhoc for iPad/iPhone connection. I can connect to the T-2 via WiFi settings in the iPhone. JMT Version 3.3 (build 3 20190716) reports the same as before...

I have been using the IOS version of JMT since I first received my T-2 6 years ago. I have had connection issues that have all been ironed out during that period. I have just purchased a new iPhone 11 and JMT will not connect via WiFi. I have reviewed all of the default settings and I have...

Stupid me. I have the adapter provided in the original shipment. That you all.

I finally had the opportunity to try my Triumph 3 receiver beyond testing on my desk or on top of a block wall in the back yard. Just noticed that the threads on the bottom of the T3 are much larger than those of either style Javad rod that I have. There is an adapter, I assume. Can someone...