Lethargic Screen in Stake mode in latest Testing build

Gregory

Gregory Suvey Tech III LCEO
Has anyone else experienced a lethargic screen in Stake mode with the latest testing build? It is driving me crazy!

Gregory Dappert
Survey Technician III/Computer-Network Technician
Logan County Engineer's Office
 

Matt Johnson

Well-Known Member
5PLS
We need more details to investigate this. Can you share a project archive in which you see this behavior?
 

Gregory

Gregory Suvey Tech III LCEO
I like using the testing version since I have a real aptitude for technology and a background in electronics. As I use it in the field, I help to work out the bugs by debugging in real time. How do I get the archive to you?
 

Adam

Well-Known Member
5PLS
I like using the testing version since I have a real aptitude for technology and a background in electronics. As I use it in the field, I help to work out the bugs by debugging in real time. How do I get the archive to you?
From my experience, Testing version can leave you stranded with no way to work. It's happened to me numerous times. Release and Pre-Release would be a much safer option right now.
 

Shawn Billings

Shawn Billings
5PLS
To answer your question. Go to Collect Prepare>Project. In the Project screen you will see Send Project to Support. You can also use Archive Current Project (which you should do after you complete every project either here or in the export screen) and put the project on your own cloud drive and provide a link to it.
 

Mikhail Drakin

Developer
You have 5000 design points in stake sequence. Did it really work fast with that in previous versions? And do you really need so many points? I'd suggest removing or hiding unnecessary points and selecting into stake sequence only really needed ones.
Also I see that the project has some very old points with bad auxiliary data, probably resulting from several database upgrades when you were updating your J-Field over and over. When and in what version of J-Field was this project started? Probably it could also help recreating the project from scratch.
Also, please check how it works in the release version.
 

Gregory

Gregory Suvey Tech III LCEO
Before the last update, it worked fantastically! Now the unit gets hot in stake mode only and the constant delay on the screen in stake mode is really annoying.
 

Mikhail Drakin

Developer
Please clarify the 2 specific versions, between which the problem appeared. And again, please check the release version also. Are you sure you did no other changes to the project or settings, e.g. changing RTK rate, changing GNSS firmware, or changing c.s. from non-HTDP to HTDP?
 

Gregory

Gregory Suvey Tech III LCEO
Went back to release version instead of the testing version and it is working fine now. I tried the pre-release version and it was still screwed up. It took going back to the release version before it was working properly again.
 

Gregory

Gregory Suvey Tech III LCEO
I just tried the testing version again and it was still not working right. So I tried the pre-release version and it is working properly now.
 
Top