RTK Base RTCM correction and TCP port

D

dzuliani

Electronic Engineer
Hello,
I've tried to configure the TRIUMPH-LS as a RTK Base form the display menù. Currently the server should stream out data from the TRIUMPH ip adrres at TCP port 8002. I can login the device on that TCP port but I've to insert user and passwd before seeing the stream on the telnet terminal.
I need to stream out RTCM without inserting user and passwd. How to?

Thanks

David
 
Adam

Adam

Well-Known Member
5PLS
I helped set up a couple of LS/LS systems and had to use the password Javad for it to work. You will need to have a static ip address at the base jetpack and you will need to set the DMZ address in the jetpack settings.
 
D

dzuliani

Electronic Engineer
Adam said:
I helped set up a couple of LS/LS systems and had to use the password Javad for it to work. You will need to have a static ip address at the base jetpack and you will need to set the DMZ address in the jetpack settings.
Click to expand...
Hi thanks for answering, my setup is working correctly, I can access my LS remotely at its address using a telnet session and Javad password. But what I expect from a TCP server that streams RTCM corrections is a steram without the need of a pasword, I mean, I've other base receviers from other brands and I can see the RTCM code even with a simple browser pointing at its static address. With LS I can't do that.
 
D

dzuliani

Electronic Engineer
Matt Johnson said:
An "insecure" mode was added for TCP connections in current Test version (3.0.1.288) of J-Field.
Click to expand...
Hi Adam thanks for answeing. I've tryed the J-Field you mentioned enablig the Testing option inside the Software Update menù. Now I can chose if I want to use a "secure" or an "insecure" access. Unfortunately enough something went wrong with the update (or I guess so). I LAN configuration menù pass me an incorrect IP address (currently I'm using DHCP), I mean the IP address is good but already taken by another client inside my net. I've also tried WiFi and 3G (previously working) but now I can't access the RTN sub menù (the button stays always gray) for both of them (so no way to configure the Acces Point for WiFi). For this reason I went back to the prev stable version of J-Field. The downgrade is Ok but the problems stil remain with LAN, WiFi and 3G. Can you help me please?
 
Michael Stazhkov

Michael Stazhkov

Developer
JAVAD GNSS
The "RTN" button on status screens can be grey out in cases:
- there are no selected APN in the profile (try to edit "General Group" profile)
- selected connection (LAN / WiFi / GSM) is not active now (go to status screen of the active connection).
 
D

dzuliani

Electronic Engineer
Michael Stazhkov said:
The "RTN" button on status screens can be grey out in cases:
- there are no selected APN in the profile (try to edit "General Group" profile)
- selected connection (LAN / WiFi / GSM) is not active now (go to status screen of the active connection).
Click to expand...
Hi Michael, thanks for all the suggestions, I've found a problem on the LAN side caused by my DHCP server that was full and unable to issue new IP adressess
WiFi now it's working.

I've a last prblem with the 3G connection. When a enter the GSM menù I can see all the summary with the following status:
- Power On
- Active slot SIM2
- APN Network Dsabled
all other options are empty or filled with a --,--

- The sim is inserted inside slot 2 (I checked the back of TRIUMPH)
- in the Settings Menu: SIM CARD is enabled, the PIN is correct (I checked it on my phone before putting the sim into TRIUMPH), $G LTE Mini Car On is checked.

Strangely enough I can't set the AP Name and other options such PDP, Authetntication and Network Mode. I mean I can change them but when I enter agin inside the
Settings menù everything is again set as in the Default config.
 
Michael Stazhkov

Michael Stazhkov

Developer
JAVAD GNSS
dzuliani said:
I've a last prblem with the 3G connection. When a enter the GSM menù I can see all the summary with the following status:
- Power On
- Active slot SIM2
- APN Network Dsabled
all other options are empty or filled with a --,--

- The sim is inserted inside slot 2 (I checked the back of TRIUMPH)
- in the Settings Menu: SIM CARD is enabled, the PIN is correct (I checked it on my phone before putting the sim into TRIUMPH), $G LTE Mini Car On is checked.

Strangely enough I can't set the AP Name and other options such PDP, Authetntication and Network Mode. I mean I can change them but when I enter agin inside the
Settings menù everything is again set as in the Default config.
Click to expand...
We doesn't support SIM card PIN code yet. Please remove PIN code using your smart phone and try it in Triumph-LS again.
 
D

dzuliani

Electronic Engineer
Hi, did you access my TRIUMPH?
I've it under my eyse right now and on, since a few, the screen reports:
Please waiting: booting
Triumph-LS ready to sue
SSH console location: ssh root@Triumph-LS00343
 
D

dzuliani

Electronic Engineer
Bad news, I've rebooted the receiver (using the powe button) and now it doesn't start up.
I'm trying to recovery it from a prevous version
 
Michael Stazhkov

Michael Stazhkov

Developer
JAVAD GNSS
So. Will you give us a chance to check the GSM issue with your device? Could you connect to RAMS and tell us the device password and serial number?
 
D

dzuliani

Electronic Engineer
Ok I've started the Custom Server under the remote assistance menù.
Server Address is rams.javad.com
Sever Port 8800
Passwd P1pp0
 
You must log in or register to reply here.
Top