g-file export

JohnNutkins

New Member
I’m experiencing some issues with one my LS’s… After doing the Linux update, many of my profiles were changed. I’ve got them straightened out and feel like I’m up and running again except for the exporting of the g-file. The unit is now exporting a g-file that is missing point names and the entire G line.

Below is an example of how the g-file has exported in the past:

8987



This is how the LS is exporting the g-file now:

8986


Any help with this would be much appreciated.
 

JohnNutkins

New Member
This is not how my screen appears when I attempt to export a g-file... must be something to do with an update??
 

Matt Johnson

Well-Known Member
5PLS
What version of J-Field do you have? That is what the screen looks like in the current Release version.
 

JohnNutkins

New Member
This is the current release version. The options should look like the screenshot Andrey posted. Please check again.
I am not getting the same screen as Andrey. I have two LS's that both have the same version of J-field and they both do not have that screen appearance. One of the LS's did not change the g-file export but the other one did. The LS that changed the g-file export also had a bunch of profile settings changed.
 

Matt Johnson

Well-Known Member
5PLS
It is not currently connected to RAMS. Go to Support > Remote Assistance > select the JAVAD GNSS, INC server and then press connect
 

Matt Johnson

Well-Known Member
5PLS
Ok look at your screen now that shows the options for exporting gfiles, it is identical to the screenshots we posted.
 
Top