File RW5

giulio

Member
Hello, I performed a survey with my Ls alternating the rtk connection from regional base (Ntrip) and from T-3 via Jcors. I then exported the points detected in the RW5 format to import them into my topography program, but unlike what happens for similar surveys that I performed with another instrument, recording with Survce always in the RW5 format: exporting from Ls I find myself all the points connected to a single base (T-3, about 3 km) with the relative delta X Y and Z instead the points 1059, 1058, 1054, 1053,1052 ... were detected with a regional base connection (a about 15 km) I do not understand why.
 

Attachments

  • 2022-08-30 A-220830 17_15_34_giulio.rw5.txt
    19.5 KB · Views: 114

Sdrake14

Active Member
Giulio, did you DPOS this file before you exported the data? I am not real clear on the issue here but I may have experienced something similar if I understand correctly. Is the issue that you wanted the points data exported using the different bases alternated between during the survey?
 

giulio

Member
unfortunately here in Italy, in my area, it is not possible to use dops. I would like each point to maintain the connection with the vector of the base (therefore with its deltas X Y Z). This normally happens in Survce where they alternate links, in the same survey from different bases.
 
Top