Search results

  1. R

    CORS Fixed Coordinates are wrong

    Just noticed after I post process the LS the CORS Fixed coordinates are wrong. This is the only project that I work in meters and UTM coodinates, usually its US Survey Feet and State Plane Coordiantes. The screen shots below show the point report after the project was sent to DPOS. The Auto...
  2. R

    J-Field 3.0.1.387 still freezing up...

    00199, using HPT435BT, isn't freezing up as much, but did once last Friday.
  3. R

    Gathering in Maryland

    Any results yet?
  4. R

    screen

    I am stiling having almost daily lockup problems requiring reboot. I must of held the on/off button down to long a couple of times as I had to reset my settings and return to the base and restart, very frustrating.
  5. R

    screen

    Sorry, to be confusing, at at least once a day the LS has locked up and it have to be rebooted by holding the on/off key down until the battery lights go off. Then it can be restarted and will work fine for a while.
  6. R

    screen

    I been having the same problem at once a day, not using camera. I am updated to the latest version of Jfield on Linux. Don't know if a screen saver is being used, never set one up, but screen does black after a period of inactivity, usually comes back after touching screen or one of the buttons.
  7. R

    Another Problem with Latest Software

    That worked, Thanks. Still don't know the extension name was changed from zip to txt.
  8. R

    Another Problem with Latest Software

    I am having a problem with "Archiving Current Project". I have found this problem with J-Field 3.0.0.206 & 3.0.0.203. Usually when archiving current project, J-Field will create a zip folder with all of the project's folders, now it will create a large txt file that is all in machine language...
  9. R

    Problem with the latest software.

    Thanks, Got it loaded, The last time using the LS was not good. Hope this works better.
  10. R

    Problem with the latest software.

    Is it recommended to rollback the GNSS firmware to 3.6.13 and if so how do you do it?
  11. R

    DPOS reports sent from LS and computer don't match

    Good to know, would a much longer observation time be better and yield decent results?
  12. R

    DPOS reports sent from LS and computer don't match

    I took a shot in a difficult location and got an RTK lock and collected for 180 seconds, but it would not fix for verification. So I collected for 15 minutes and post processed with the LS and everything looks good, the LS chose the PPK fixed location and the RTK and CORS fixed solutions are...
  13. R

    Invalid GNSS data??

    That's what happened, resubmitted and it worked. Thanks
  14. R

    Invalid GNSS data??

    Thanks, Matt That's what I tried twice, don't know why it didn't work for me. Thanks again. Ron
  15. R

    Invalid GNSS data??

    I was in a hurry yesterday and forgot to start my base, had everything set up, just walked away without starting. So after I crossed a nasty ravine, I remembered that I didn't start the base. I thought I would continue to the point I wanted to observe and observe with the LS and send the data...
  16. R

    Migrating Triumph-LS to Linux OS

    Migrated to LInux a few minutes ago. My projects were restored, but not my codes and settings. The units are meters and I forgot how to change to US survey feet. Did I miss a step? My LS is serial number 199.
  17. R

    no cors in range

    I also got the "No CORS in Range" message today for work done yesterday. ???
  18. R

    DPOS keeps losing connection

    I have been having the same problem, sounds like at least it not on my end. I have been using this feature quite often and do miss it. I hope it can fixed. This is great feature and really appreciate all the features that Javad provides for us.
  19. R

    LS not receiving UHF Radio

    Thanks, Matt Did as you suggested and it worked. Quess I should had reviewed the manual. Now I will remember what the red letters and numbers are indicating. The LS and T2 are great products and I am very glad that I signed up for the trial and purchased them. This is an excellent site and I...
  20. R

    LS not receiving UHF Radio

    The last time I used the LS was for staking and near the end of the day when I pushed the start button to observe a staked point, the LS would start clicking fast and the epoch numbers would go up in intervals of 3 and 4 instead of 1. This happened after I had been working 6+ hours. I...