Search results

  1. Donald E Robinson

    Are You Sure You Want To Reject?

    I would like to see something like Windows® Recycle Bin. I have to admit I lost a days work by hitting the Reject button at each observation. I must have been sick or something because I thought I was hitting the Accept button at each observation. A Recycle Bin would have saved the day!
  2. Donald E Robinson

    Ghost Coordinates

    Got it! Thanks Matt!
  3. Donald E Robinson

    Ghost Coordinates

    Duane- Thanks for the advice.
  4. Donald E Robinson

    Ghost Coordinates

    Thanks Matt. I do remember noticing the TLS recording Raw data and I disabled it. Should I be recording the raw data, with my TLS, during my survey, and did that affect the location at 111 and those points collected after?
  5. Donald E Robinson

    Ghost Coordinates

    Here it is. just don't know where Pt @111 came from. The Point it saved, when I started the Base, was Pt 3001 and it is OK.
  6. Donald E Robinson

    Ghost Coordinates

    Pt @111 N; 916219.773 E; 1842944.655 Z: 780.402
  7. Donald E Robinson

    Ghost Coordinates

    I did DPOS.
  8. Donald E Robinson

    Ghost Coordinates

    I check the LS and found that NAVD88 wasn't present on the Survey page. I set it to NAVD 88, and the elevation changed, but it is still out about 5'. The distance is still 3.46' apart. The coordinate it recorded during setup was correct for Pt 3001. I don't know where Pt @111 came from.
  9. Donald E Robinson

    Ghost Coordinates

    Yes. It was set to NAVD88, ContUS12B Zone 3200 (NC)
  10. Donald E Robinson

    Ghost Coordinates

    I'm not sure where I am supposed to post this, but, BIG problem today. I located numerous corners and roadway only to find out that I have a coordinate 3.48' from my base and 100' off on elevation. I don't know where this came from! During setup, I selected a known point for my base station...
  11. Donald E Robinson

    Where are the 10s?

    Thanks for the advise Matthew!
  12. Donald E Robinson

    Where are the 10s?

    I'll try that. I have been trying to us Localization, but have not had much luck with it on this particular job. The existing monumentation is not even close to the deed descriptions, so, I am receiving a lot of errors on distances. I can physically see that the locations of the monumentation...
  13. Donald E Robinson

    Where are the 10s?

    The CORS column is blank. I have not been able to send the base file to DPOS in the field. It is processed in the office and I was attempting to adjust it in the LS. after entering a new point with the new coordinates. I still not familiar with all of the features since the J-Field program has...
  14. Donald E Robinson

    Where are the 10s?

    UPDATE I was Moving Points in COGO. I was moving 31 points (1-31) from Pt 10 to Pt 110. When selecting points in CALCULATE The list went from 1-9 and 11-19 and so on. Sorry for the numerous post on this.
  15. Donald E Robinson

    Where are the 10s?

    Another problem... I want to move my Base Point. The initial observation of the Base Pt was autonomous. The surveyed points were based on the autonomous Base Pt. I processed the data that was collected for 3 hours at the Base Pt. I want to adjust my base point and surveyed points to the...
  16. Donald E Robinson

    Where are the 10s?

    OK... I was Moving Points in COGO. I was moving 31 points (1-31) from Pt 10 to Pt 110. The list went from 1-9 and 11-19 and so on. I was unsuccessful performing this function. Once the data was entered and I select MOVE, a dialog box pops up with 2 options "OK" and "Report". I selected OK...
  17. Donald E Robinson

    Where are the 10s?

    It happened yesterday, but, this morning I cannot duplicate it. I believe I was in Localization selecting multiple points. I'll pay more attention today to see when it happens.
  18. Donald E Robinson

    UHF

    The Avoid did not appear when I was scanning the frequency. It appeared after I sent the new selected frequency (that was shown to be good during the scan) to the T2 via Bluetooth. Also the Bluetooth icon would alternate between red and blue. I would get a message that the uhf antenna was too...
  19. Donald E Robinson

    Where are the 10s?

    J-Field 3.0.1.417
  20. Donald E Robinson

    UHF

    I had the same problem about a week ago. I would scan the frequencies and select a one that was good. Then when I set everything up, it would tell me to avoid that frequency. I was using a marine battery that I kept charged on a "battery tender". I charged it with regular battery charger and...
Top