Search results

  1. Alexey Razumovsky

    RTPK Method

    If I were a surveyor, it would be enough
  2. Alexey Razumovsky

    RTPK Method

    http://javad.com/jgnss/javad/news/pr20210801.html
  3. Alexey Razumovsky

    Unknown Error

    https://javad-software.s3.amazonaws.com/software/Justin/log0803a_new.zip Here you go
  4. Alexey Razumovsky

    Old rtpk vs. New rtpk

    pp.106-108 deals 3 files (3:31; 10:32; 5:25). Total time at point 19 minutes 28 seconds. You processed files separetely with split parameter = 120. I merged files and got 1168 seconds file. I processed the file with different parameters. All RTPK solutions are within 0.013 mm in hor. I still...
  5. Alexey Razumovsky

    Old rtpk vs. New rtpk

    No overlapped data for base and rovers
  6. Alexey Razumovsky

    Old rtpk vs. New rtpk

    Does SCVRS broadcast all sats or GPS & GLO only?
  7. Alexey Razumovsky

    Old rtpk vs. New rtpk

    Shawn your tolerance settings are correct
  8. Alexey Razumovsky

    Old rtpk vs. New rtpk

    Send to support an example of project that you expect to be useful and we will find the best settings all together. We found that 1-2 minutes per solution is best choice for T3-TLS+ pair. You wrote also that you changed time to 6 minutes and stopped RTPK manually after 3 minutes. Why don't you...
  9. Alexey Razumovsky

    Old rtpk vs. New rtpk

    Do you have LS+ or standard LS?
  10. Alexey Razumovsky

    Old rtpk vs. New rtpk

    Darren, next time when you get "no solution for the vector" in 15 minutes send a project to support. We are doing a lot of test in different locations but Ive never seen this for 15 minutes session. I believe it will be helpful. RTPK is not so mature as RTK is. We might to find best approach...
  11. Alexey Razumovsky

    Unknown Error

    @Matt Johnson First day - 10 hours, second day - 1 hour. No way to adjust automatically because 1 hour data often yields better rms and so bigger weight. In the meantime 10 hours solution is much more accurate.
  12. Alexey Razumovsky

    Unknown Error

    DPOS has low knowledge about availability CORS data on the period of observation. First day may have full files set, second day may have no data at all. It destroys a workflow because DPOS does not show table of data availability and hides some stages of data managment. I agree that it decreases...
  13. Alexey Razumovsky

    Unknown Error

    DPOS does not accept files that pass over GPS midnight. Splitted files here
  14. Alexey Razumovsky

    ELEVATION SPREAD ON TR-2

    Did you submit to CORS US?
  15. Alexey Razumovsky

    Sudden Loss of Workable Fix in Open

    I see #11GLO, ##14,18GAL are unhealthy. Justin engine disregards these sats. Is it correct for RTK?
  16. Alexey Razumovsky

    DPOS Triumph 2 files failure

    How I can check?
  17. Alexey Razumovsky

    DPOS Triumph 2 files failure

    1) DPOS process files correctly. DPOS solutions are in 1 meter away from naviganational/standalone. solutions. So GIS sw or you yourself were misled. 2) Files are good. 3) 10-20 minutes obsevation sessions for baselines more than 150 km realy isn't good idea. I recommend 1 hour for baseline...
  18. Alexey Razumovsky

    DPOS Triumph 2 files failure

    I will look into and answer
  19. Alexey Razumovsky

    RTPK Real Time Processed Kinematic

    Nate, look at solution verification number (2) means 99%, (3) means 99.99%. Set 6 minutes of observation session and 2 minutes for solution in any suspicious locations. It may deals value 3 (3 segments agree within 0.1' in vert and hor). In that case wrong fix happens 1 per 10000.
  20. Alexey Razumovsky

    Verification with Variety at Javad Training Event, May 6-7, 2021.

    Point 300 has Trimble base processed. PP.301, 302 are processed with Triumph3 base. You might download base file from base receiver and RTPK it. The results will look much better.
Top