Search results

I was told to just use the Pre-Release version. This seems to solve the issue with being able to communicate with the base/radio. There was an update that was sent out but it did not repair my issue. I had downloaded the repair in the office but when I was set up in the field it didn't work...

Okay. Thank you John.

I am on the PreRelease version right now. Do you want me to switch back to the "Release (recommended)" version?

I am connected to RAMS: Field Crew 00176 Do you want me to go back to the "Release (recommended)" version so you can see whats going on?

No problem Armen. I've been called a lot worse...

Here are the other screenshots for comparison:

I'm wondering if it has something to do with the latest update? I had updated our LS+ before going into the field and noticing the problem. I just download the "PreRelease" software and it works!!! Could something have been corrupted in the lasted "recommended" release? This is what the...

We seem to be having some issues with our HPT435BT radio connecting with our LS+ & Triumph-2 base. We tried to setup the base last week in the field and could not get the radio to start broadcasting. I can connect to the Triumph-2 but once I would try to set the parameters for the radio, the...

Waiting on a serial-USB cable to show up today... If I follow Armen's instructions, I get the same last pic in his post, the image with the missing radio. This used to be that screen that you would be able to see the 35 Watt radio and what power output, etc. Now nothing. We have been dead in...

Matt: Question: Do I need a cable to connect our HPT435BT radio through Netview? I contacted you on Friday about an issue where my LS+, Triumph 2 would not connect to our HPT435BT radio. I had to leave the office so I couldn't leave it on RAMS. When I would go to "Remote Base", I could...

Thank you guys for your help with this issue. MDOT finally got back with me and they had an issue on their end. Waste of a day!

I've sent an email to them and we will see what they have to say. Thanks for all of your help Adam!

BRIG would be the nearest site.

When I choose TCP it does not allow me to select a mountpoint. I can only select my mountpoint when using NTRIP. This is the way we have had is setup since we first received our LS in 2015.

No problem. I'll leave it connected.

Sure thing. sn#00176

Thanks Adam. I checked the settings and the NMEA period was set to 10 seconds so I changed it to 5 seconds with the same results. We upgraded to the LS+ a few months ago and haven' had any issues until now.

We were getting ready for the field today and can't seem to get our LS+ connected to our local CORS sites. This happens with both Wifi and LAN connections. RTN Status will say "SOCKET FAILED" then turns to "ERROR TIMEOUT". I've tried turning the RTN configuration on and off, disabling the...

We are having the same issues here in Michigan. I tried to upload a file, approx. 3 hours, from last Wednesday and it stated the same "Reference observations not available at the moment."