Search results

  1. D

    Back ground maps

    You need to use MOBAC (free) or Global Mapper to get better resolution.
  2. D

    PPK from "unknown" question

    I don't think so. They put the base on known point from rtn and the DPOS from day one static base matched horizontal within 0.05'+-.
  3. D

    PPK from "unknown" question

    I was just trying to guess why the ppk solutions were consistently off and thought it might be because of an uncorrected autonomous base session. They picked a known point to start, but the base locked up shut down on second day, so they switched to rtn and continued. I didn't get a look at...
  4. D

    PPK from "unknown" question

    Shawn, that's exactly what I said. Seems like an autonomous PPK. But I'm not understanding how it even gave a PPK from autonomous; if that's what it did. There's no base file associated with these points apparently, so how could it generate anything for PPK? If that's what's going on, then I...
  5. D

    PPK from "unknown" question

    We were able to download the day 1 base file via Bluetooth from 1M to LS, and process it. At DPOS it said no base downloaded but showed day 1 file on 1M, so downloaded while connected via Bluetooth and worked fine.
  6. D

    PPK from "unknown" question

    Shawn, that's the confusing part. Why are we getting it, and what does it mean "unknown"? I've advised him to contact one of you guys and get an overnight support session or something. I've spent some hours but can't get it. Doesn't make sense; until it does.
  7. D

    PPK from "unknown" question

    Recently purchased T 1M locking up and radio not transmitting well, SN 25396. Using T 1M base and LS rover. Day 1 Base started using Known point, and records data. Same project Day 2 base started using known point, Base locked up and shut down, no base file seems to be present for the day 2...
  8. D

    setting date and time

    I agree improvements could be made. I do have SurvCE, but not actually too familiar with it. The way I do things I can't really do it in the field, even with SurvCE (with my limited knowledge of it). I bring my laptop and download into CADD if that's an issue, but usually what I'm working on...
  9. D

    setting date and time

    Bill, you should have same level of function. Give me a call or email on what you're wanting to do and I can probably show you how to do it (if not, one of the real experts like Matt can). But yeah, it's a different software, so with multiple crews sometimes it's easier to use only one...
  10. D

    setting date and time

    Yes, it didn't fit the work flow. I've noticed companies with a few crews running want everything on one controller for ease of training and interoperability.
  11. D

    T-2 has a crack in it

    Mine has developed cracks again as well. Was replaced before the rubber corners came out. I wonder if some sort of epoxy could be added to the mix to make it stronger?
  12. D

    ETA on Linux and Galileo

    I agree, just wanted to get more information out there, folks seem to be wanting it. To summarize all the links: Ligado (formerly lightsquared) (and possibly others such as Trimble) has lobbied against Galileo use in the U.S. to the tune of Millions of dollars the past few years. FCC...
  13. D

    ETA on Linux and Galileo

    And here's the follow up, which may describe the difficulty for Javad a bit better: https://insidegnss.com/gps-alliance-asks-fcc-to-reconsider-denial-of-galileo-e6-signal/ I mean you spend years developing a solution including E6 band based on statements from Gov. that it will not interfere...
  14. D

    ETA on Linux and Galileo

    FWIW, the FCC only very recently approved use of Galileo in the U.S.: https://www.fcc.gov/document/fcc-approves-galileo-global-navigation-system Interesting article discussing the need for FCC approval: https://galileognss.eu/why-galileo-is-not-seen-in-united-states/#more-3501 Difference...
  15. D

    setting date and time

    Thanks Adam!
  16. D

    setting date and time

    I set it up and it started giving corrections to the rover LS without using the base rover setup area. So base rover button doesn't apply in this case I assume? I did use the external radio antenna on the base but wondering if that's necessary or not? With external radio I know not supposed to...
  17. D

    setting date and time

    Thanks Adam! I'll be using uhf initially, but this will be helpful.
  18. D

    ETA on Linux and Galileo

    I really don't know if it has anything to do with it, but this is latest news I've seen: https://www.gpsworld.com/directions-2019-high-orbit-glonass-and-cdma-signal/ And, the sanctions issue I mentioned in an earlier thread that has reportedly delayed K2 satellite deployment...
  19. D

    setting date and time

    Thanks guys. Guess I need to take it outside where it can see some satellites. It's a used one I picked up, just getting Linux on it and going to try the base/rover with 2 LS. Is that procedure in the manual somewhere? I thought I saw a thread on here about it, but can't find it now.
  20. D

    setting date and time

    On the LS, with Linux, is there a way to set date and time? Time is 15 minutes ahead and date says Dec. 21, 2018 today.