Search results

Pappasurveyor looked at the radio power setting. 1 Watt. How that happened is unknown. I had wondered at how cool the radio stayed. We changed the radio to 25 watts. He taught me how to check the radio power. The base has to be connected to the base. The radio range is awesome now. I just...

I have terminals on my radio power cord and I bolt it to the battery. I have a switch in the line. I don't know how to switch the radio on using software.

I will set up in about an hour. I also need some basic help. How do I take a screen shot? How do I get it to my computer?

The range on my HPT435BT radio to my LS has dropped recently. I am getting about 400' with the internal antenna, and about 900' with the external antenna. This is line of sight. I could not get 500' with the external antenna in the woods today. I don't know how to check for noise. The range...

Thanks Adam. Adam worked on it for a few minutes and the LS is working again. My business is open.

I just want to get location for a point that I can count on. Under very good conditions, I can collect 3 points on the same location with rod in a tripod and they will agree. If there is a tree near by, the 3 points will not agree. I have temporarly shut my business down until I can depend on...

Your post said 1200 EPOCHS. I have been using 120 EPOCHS. I am glad you started a new thread. Please see my post on "Screen Change".

I learned how to change the power setting for my 35 watt radio. I changed it from 1 watt to 35 watts. I read the instructions many time before I understood. This is a great improvement. My problem is that the LS will not stop at 120 EPOCHS. I stop it manually at above 150 EPOCHS, but no...

Thanks Jim, since my LS does not stop at 120 EPOCHS and I have to stop it manually, I think that the verify function is not working. I have no way to be sure that a point is good other that repeating it several times. Also, I can't adjust the power setting on my radio. I have tried to follow...

The LS works, but not well. The "STOP AT 120 EPOCHS" does not work. I manually stop at about 150 epochs. There is up to 5 feet of difference in some of the positions on the same point. I am taking 2 or 3 readings on each point, some are tight and some are not. I turned the "RTPK USAGE" off...

Thanks Adam. I am amazed at the quick response. I will set up in my yard when I can and test this. Again, Thanks.

Thanks. With your help, I have learned how to start a new project. I will look for the pop up. I had already found my old jobs.

I have a LS #298, a T-2, and a 35 watt radio. I also use the MS DOT RTN (MDOT). I installed the updates last night. I had not installed updates for a long time. All the screens are new. I use two profiles "UHF" and "MDOT". I cannot find the UHF profile. The MDOT profile seems to work. I...

I wonder if my old LS will work with 5g. Does anyone have an answer?

I need both. Cellular service is spotty.

I did four more 2-1/2 hour sessions. The OPUS spread was 0.29'. The DPOS spread was 0.15'. 371.64', 371.68', 371.78', and 371.79'. I think I have a good elevation. I have learned a lot. Thanks to all who helped. The support is amazing.

The spread is much less from DPOS. 371.50', 371.54', 371.72', and 371.75'. Thanks. I don't know how to enter my rod height, I subtracted it from the height on the DPOS sheet.

Mr. Alexey, That was the problem. It worked. I am still sending in files.

Mr. Billings, The site is wide open. It is about 200' south of large chicken houses.

Mr. Alexey, I am not sure that I know what cors US is. Thanks