Search results

I'm using my ls+ with the cadastral networks of my region, unfortunately the closest base (about 18 km is only GPS and Glonass) while those 4 constellations are about 30 km away as for precision and speed of fixed the closest one works better even if it has only 2 gps frequencies and 2 glonass...

I attach today's screenshots which highlight my problems with the RTN networks to which I connect my LS+ rover. I am in an urban area with a good view of the sky to the South and East. In fact I don't have positions I can trust and I go back to surveying with my old Navcom Sf3040, which only has...

but this value should not always be equal to zero (being the distance from the first mover). On my instrument it shows a measurement referring to a point where I had established a base about a year ago. I also always have these problems when I use the cadastral networks, as soon as I download...

Release Notes - 4.3.00, when for ls and ls +? Perhaps with a solution to Nrtk and modem problems.

Thank, Update also solved for me which firmware and profile recommended for ntrip network connection with only GPS and Glonass

New problem: the update screen is stuck at 30%, even turning it off by forcing a restart, once this has happened it always returns to the same point.

perhaps it is for this reason that Rtpk differs from the Rtk solution by a value of approximately 5/6 cm, equal to the value of the offset of the rtn station antenna

Josh, i had the same results as yours, in the open sky 360°, without obstructions, (with corrections from the RTN network with 4 constellations about 28 km away) many difficulties in fixing (times too long for the actual conditions). In less open areas the counter times faster....

I repeat that the lack of detailed information makes us use our equipment inappropriately, I also had understood that autosetup, with the other option: no same frequency, would choose the best combination of constellation and frequencies for us. Now after more than a year we have understood (we...

I'm trying different settings, a strange piece of data has been appearing for some time: I don't understand the distance shown in the penultimate line, it used to be the distance from the motor 1, now I don't understand where it comes from.

In your test were you receiving corrections from a Javad base? I think that as you hypothesized, with corrections from other brands the signals there are more problems and it seems to me that a value lower than 60 is better. I will do further tests

I sent an email to support asking if they can provide us with clarification, if so I will update you

I did various tests and I noticed that by setting the max signal to 60 the engine has difficulty fixing by setting 40 it worked better, I'll try asking support and see what they reply.

This is to use our equipment to 100% of its possibilities. We hope that technical assistance will regain the capacity it had in previous years and which differentiated it from other companies

Matt, my opinion "no same frequency" should be the automatic option to ensure that the 4 engines do not use the same frequencies and constellations (what you suggest doing manually) which however does not work well with the current networks (I think because these do not have all the frequencies...

But what is the option for: "No Same Frequency"? in Autosetup Strategy.

Thanks Matt, I pressed automatic configuration, I thought that having also selected the "not same frequency" option, the motors I would choose would be the optimal configuration with different frequencies, this method worked very well with the t3 base and rover ls+. I tried not using the auto...

Thanks for the replies. For the SIM I have tried several times to reverse the slot but the problem remains and I don't understand why sometimes it connects to the internet and sometimes not. For the 18 mile distance discrepancy, with my other rover (Navcom 3040 which only has 66 channels and is...

Good morning, I continue to have problems with my Triumph ls+, the modem with the sim connects to the internet once out of 6. Today I tried to detect a strongpoint with Ntrip connection from a regional Gnss, GPS, Galileo, Glonass and Beidou station (about 29 km away), despite being in the open...

Good morning, are there other substantial differences, apart from the lack of internal modem, between the Triumph 3 and the 3-NR? The promotion requires the delivery of a T2 or is also valid for a normal purchase. Thanks