Search results

  1. Zoltan Varga

    Sometimes unable to turn T2 on

    Hello, This is about a 7 years old Triumph-2 receiver. We received the complaint from the end user in January first time. They charged the battery at night, but in the morning they could not turn T2 on. We updated the firmware to 4.2.01, and exchanged the cells in the battery to new cells. After...
  2. Zoltan Varga

    Battery LED

    Some of my clients reported the same issue earlier. As they purchased the receiver more than 5 years ago, I suggested to replace the battery.
  3. Zoltan Varga

    Migrating Triumph-LS to Linux OS

    I tried to perform the migration today 5 times. Every time it was not sucessfull. At about 40% of download it displayed "System error" or similar message. After the last trial I found the following on the connected USB memory. This was a 16 GB SD card in USB reader/writer formatted to FAT32. I...
  4. Zoltan Varga

    Triumph 2 as network rover

    Hi, My clients use T2 with SurvCE without any issue. Set RTK calculation to Extrapolate on Equip/GPS Rover/Receiver.
  5. Zoltan Varga

    Triumph 2 as network rover

    As a Javad dealer in Hungary I sold a few Triumph2 receivers as network rover together with Carlson SurvCE installed to different controllers (mainly with Nautiz X8GW and Juniper Mesa2 GC). For this you need T2 with RTK option, and a controller with internet connection. For internet access it is...
  6. Zoltan Varga

    LS auto positioning for Base

    I am in Hungary, so I set HD72/EOV/Baltic projection.
  7. Zoltan Varga

    LS auto positioning for Base

    I checked the rover on other known points. It was correct (but the points were 20 m from the base). When I configured the base I selected "Select from the list" on Base Position screen, and then I selected the right point in the list. Telling the truth first time the position of the rover was...
  8. Zoltan Varga

    LS auto positioning for Base

    Adam, the problem solved ! Collegues from Moskaw helped me. On Javad Protocol screen RX mode was "Receive from Base". They changed it to "Auto Detect". Now my LS base transmitting correction, and the rover is receiving. Regarding to height of the base, when you select Setup and edit the General...
  9. Zoltan Varga

    LS auto positioning for Base

    Adam, I have J-Field 2.1.1.913 on the LS. Is this the one that you tested ?
  10. Zoltan Varga

    LS auto positioning for Base

    For me, just because my client has 2 pcs of LS with internal UHF.
  11. Zoltan Varga

    LS auto positioning for Base

    Matt, I do not want to use external radio on the TLS base, or a repeater, because I have internal radio. But I do not know how to start the base with its internal radio. I created an UHF RTK base profile in Setup/General group. Then I tapped the radio icon on the top. I can see here that data is...
  12. Zoltan Varga

    LS auto positioning for Base

    I have a client who has 2 pcs of TLS, both with internal UHF, they have no other receiver. Generally they will use TLS as VRS network rover, but in the deep walleys of Transilvania they wat to use one TLS as UHF base, the other as UHF rover. We surprised very much that this is not possible. They...
  13. Zoltan Varga

    Battery LED

    Hi, The battery LED remains on after switching off the receiver. What does this mean ?
  14. Zoltan Varga

    Android style

    I agree, totally.
  15. Zoltan Varga

    Bluetooth pairing T2 and HPT401BT

    I have found this document: Javad radio pairing Problem solved !
  16. Zoltan Varga

    Bluetooth pairing T2 and HPT401BT

    Hello, My T2 is configured to send out correction via blt-b port. I configured the HPT with ModemVU. I set the MAC address of the T2, changed the mode to Master and turned the BT on. If I turn on T2 and HPT, while I connect NetView to the USB port of T2, I can see on the Ports/Bluetooth dialog...
  17. Zoltan Varga

    Android style

    Hmm, I think that RAm mount is more practical. http://www.rammount.com/part/RAM-B-400-C-UN10U
  18. Zoltan Varga

    Android style

    What is the exact type of the phone holder ? Can you give a link to the webshop ? Is it fixed to the pole or to your arm ?
  19. Zoltan Varga

    Triumph-2 antenna height

    Thank you ! It is clear now.
  20. Zoltan Varga

    Triumph-2 antenna height

    Hi, I have a rover pole, its height is 2 m (from the tip to the upper end). I use the 2.5cm height 1/4-20” to 5/8-11” adapter. What have I got to set into the Measured Height datafield ? Is 2.000 m the right height, or 2.025 ?
Top