Problem is the 5700 setup isn't worth much, maybe $3k on eBay.
To get an RTK Javad setup I'd need at miminum another T2 ($5k), RTK upgrade to my existing T2 ($1.5k), and a radio ($2k). I only use this setup 2-3 times per year, can't make the additional $8.5k to payoff.
I think I'm best off by...
I have an old Trimble RTK setup, still works great but the old Trimble 5700 receivers don't have any of the new constellations. This isn't a problem for the base, but if I could use my T2 as the rover I think I'd probably have less trouble getting good positions under tree cover and near...
Yes, I know. Problem was that DPOS wasn't processing it.
Tried again this morning after Dmitry said issue was resolved, and no issues this time around.
Yes, I am positive they are DGPS and not autonomous. The GGA sentence indicates DGPS correction for all points, but SVs on these outliers drops from 9-10 to 7-8, HDOP also drops from ~0.95 to ~1.17
So Beast Mode wouldn't help me then is what I'm understanding.
Don't use RTK. Just WAAS.
I use the T-2 to report the position of my geophysical instruments in real-time. The smallest sensor is 1 meter wide, the largest is 3 meters wide. The T-2 generally reports a position under open sky of 0.5-0.8 meters accuracy, which is fine given the size of my...
Can I get my T-2 upgraded to Beast Mode? I need better autonomous positions under tree canopy.
Right now my $60 15 year old SiRFstarIII outperforms my T-2 if there are any trees around. Which is fine if I'm working under trees, but in mixed canopy/open it means the T2 is out.
I am having trouble with DPOS too. Reports no CORS in range. Processed files from southern Indiana just fine, but won't process files from Nashville TN.
I am getting frustrated with the unreliability of DPOS lately.
Doesn't work.
T2 connects fine to my phone's mobile hotspot (my phone shows it connected, and the T2 wifi indicator turns green). In JMT I connect to T2 via bluetooth and select "Reconnect With Wifi", T2 resets itself but JMT never connects and just goes back to the "select a configuration"...
Does anybody know if there are plans to make DPOS capable of kinematic data processing? I can convert the log file to Rinex and use the Canadian PPP service, but that is extra hassle.
Thanks Matt.
According to the ToolTip for Enable SBAS Code Differential, "This parameter doesn't affect behavior of receiver running in cd, wd, or sp modes." Nevertheless, I tried it:
No change in the position:
Please excuse my partial knowledge of GPS, I'm a geophysicist not a Surveyor. I'm trying to run my T2 using WAAS corrections. This is how I have the positioning setup:
In this mode it only uses GPS satellites in the positioning, not GLO or SBAS satellites:
If I change the Position Computation...
Apparently to do this you have to purchase the RTK option. Someone correct me if I'm wrong, but what I've recently learned is that DGPS apparently means SBAS corrections only, not CORS corrections.