Eugene Aksyonov
Well-Known Member
Since 2.0.5.1009
- added Dpos networks support for Washington(US), Oregon (US), CORS (Aus)
Since 2.0.5.1005
- Collect: Fixed Validate phase
- Base/Rover: Blocked pop-up message "Can't order service ..." in case when "Show Base Alerts" is not enabled
Since 2.0.5.992:
- Fixed Dropbox support (implemented V2 API)
- Fixed crash on downgrade from 2.1.x version
Since 2.0.5.990:
- Base/Rover: Fixed starting of Base on the Triumph-2 receiver with boars revision less than 4
Since 2.0.5.815:
- <b>Added Base Guard feature (ATTENTION! To use this feature update Base firmware to <font style="vertical-align:top;color:red;">version 3.6.12 or higher</font>! Update Base firmware to the LATEST version! Base cannot be started with firmware versions older than 3.6.8!)</b>
- Improved External Radio identification
- Added UHF Repeater Support
- Added IGS network. Can be processed with Giodis
- Fixed TrueNorth Calculation
- Fixed Localization issue after sending project to DPOS
- Fixed setup of PPS and Event paramaters
Since 2.0.5.809:
- Fixed FW update for SSRX modem
Since 2.0.5.674:
- Added possibility to recover a Base point from the context menu of the "Points" screen
- Added possibility to attach raw GNSS file to a point from the context menu of the "Points" screen
- Added possibility to remember the last entered attribute value
- Added alert message and icon in BaseSetup screen to indicate expired options on Base receiver.
- Assigned 1sec recording data rate by default in preset configs.
- Supported JShield parameters.
- Improved logic of Screen Saver behavior
- updated Custom server defaults as rams.javad.com:8800 in "Remote Assistance"
- Improved DPOS service functionality.
- added Giodis Engine
- network coverage detection algorithm
- added indication of "bad" files
- "Use Data UpSampling in CORS Processing" is enabled by default
- "Use DEBUG Server to Process Data" become available.
- removed base processed(BP) text report file
- Improved "Recover DPOS session" feature
- Improved Whiteboxes. Clustered-averaged position instead of plain averaged position is used.
- Improved performance
- Fixed scale value on the map screen
- Fixed "Wait" state of a DPOS task ("Checking Base data presence") even if the base file was downloaded
- Fixed bug related to configuration of ports in Base/Rover on Victor-LS
Since 2.0.5.667:
- Improved indication of Base IP.
- Base/Rover: fixed indication of radio's firmware version.
Since 2.0.5.659:
- improved logic related to leap seconds (using internal algorithm instead of GPS almanac to calculate the leap seconds)
Since 2.0.3.1894:
- Improved J-Tip support
- Improved Localization
- Improved DPOS:
- added Texas Network Support
- added EUREF network
- added possibility to select a Preferable Network
- added possibility to recover a DPOS session from the context menu of the "Points" screen
- Improved a Base point selection in the Base/Rover setup
- Improved "Points" screen
- added Speech to Text Recognition of the Audio Messages
- Improved Edit point screen
- Improved Cluster Average
- Improved Browse Files screen
- Improved Restore data from full backup: added "Profiles" option, allowed to restore profiles on another device
- Improved Export
- Improved Audio Recording
- Improved Map
- Improved Stake-Out
- Improved High Contrast Theme compatibility
- Removed the limit of 5 attributes per code
- Enabled by default screen multi touch support
- Improved Callibration Procedure
- added Dpos networks support for Washington(US), Oregon (US), CORS (Aus)
Since 2.0.5.1005
- Collect: Fixed Validate phase
- Base/Rover: Blocked pop-up message "Can't order service ..." in case when "Show Base Alerts" is not enabled
Since 2.0.5.992:
- Fixed Dropbox support (implemented V2 API)
- Fixed crash on downgrade from 2.1.x version
Since 2.0.5.990:
- Base/Rover: Fixed starting of Base on the Triumph-2 receiver with boars revision less than 4
Since 2.0.5.815:
- <b>Added Base Guard feature (ATTENTION! To use this feature update Base firmware to <font style="vertical-align:top;color:red;">version 3.6.12 or higher</font>! Update Base firmware to the LATEST version! Base cannot be started with firmware versions older than 3.6.8!)</b>
- Improved External Radio identification
- Added UHF Repeater Support
- Added IGS network. Can be processed with Giodis
- Fixed TrueNorth Calculation
- Fixed Localization issue after sending project to DPOS
- Fixed setup of PPS and Event paramaters
Since 2.0.5.809:
- Fixed FW update for SSRX modem
Since 2.0.5.674:
- Added possibility to recover a Base point from the context menu of the "Points" screen
- Added possibility to attach raw GNSS file to a point from the context menu of the "Points" screen
- Added possibility to remember the last entered attribute value
- Added alert message and icon in BaseSetup screen to indicate expired options on Base receiver.
- Assigned 1sec recording data rate by default in preset configs.
- Supported JShield parameters.
- Improved logic of Screen Saver behavior
- updated Custom server defaults as rams.javad.com:8800 in "Remote Assistance"
- Improved DPOS service functionality.
- added Giodis Engine
- network coverage detection algorithm
- added indication of "bad" files
- "Use Data UpSampling in CORS Processing" is enabled by default
- "Use DEBUG Server to Process Data" become available.
- removed base processed(BP) text report file
- Improved "Recover DPOS session" feature
- Improved Whiteboxes. Clustered-averaged position instead of plain averaged position is used.
- Improved performance
- Fixed scale value on the map screen
- Fixed "Wait" state of a DPOS task ("Checking Base data presence") even if the base file was downloaded
- Fixed bug related to configuration of ports in Base/Rover on Victor-LS
Since 2.0.5.667:
- Improved indication of Base IP.
- Base/Rover: fixed indication of radio's firmware version.
Since 2.0.5.659:
- improved logic related to leap seconds (using internal algorithm instead of GPS almanac to calculate the leap seconds)
Since 2.0.3.1894:
- Improved J-Tip support
- Improved Localization
- Improved DPOS:
- added Texas Network Support
- added EUREF network
- added possibility to select a Preferable Network
- added possibility to recover a DPOS session from the context menu of the "Points" screen
- Improved a Base point selection in the Base/Rover setup
- Improved "Points" screen
- added Speech to Text Recognition of the Audio Messages
- Improved Edit point screen
- Improved Cluster Average
- Improved Browse Files screen
- Improved Restore data from full backup: added "Profiles" option, allowed to restore profiles on another device
- Improved Export
- Improved Audio Recording
- Improved Map
- Improved Stake-Out
- Improved High Contrast Theme compatibility
- Removed the limit of 5 attributes per code
- Enabled by default screen multi touch support
- Improved Callibration Procedure