2.0.5.990

Eugene Aksyonov

Well-Known Member
Since 2.0.5.815:
- Added Base Guard feature (ATTENTION! To use this feature update Base firmware to version 3.6.12 or higher! Update Base firmware to the LATEST version! Base cannot be started with firmware versions older than 3.6.8!)
- Improved External Radio identification
- Added UHF Repeater Support
- Added IGS network. Can be processed with Giodis
- Fixed TrueNorth Calculation
- Fixed Localization issue after sending project to DPOS
- Fixed setup of PPS and Event paramaters

Since 2.0.5.809:
- Fixed FW update for SSRX modem

Since 2.0.5.674:
- Added possibility to recover a Base point from the context menu of the "Points" screen
- Added possibility to attach raw GNSS file to a point from the context menu of the "Points" screen
- Added possibility to remember the last entered attribute value
- Added alert message and icon in BaseSetup screen to indicate expired options on Base receiver.
- Assigned 1sec recording data rate by default in preset configs.
- Supported JShield parameters.
- Improved logic of Screen Saver behavior
- updated Custom server defaults as rams.javad.com:8800 in "Remote Assistance"
- Improved DPOS service functionality.
- added Giodis Engine
- network coverage detection algorithm
- added indication of "bad" files
- "Use Data UpSampling in CORS Processing" is enabled by default
- "Use DEBUG Server to Process Data" become available.
- removed base processed(BP) text report file
- Improved "Recover DPOS session" feature
- Improved Whiteboxes. Clustered-averaged position instead of plain averaged position is used.
- Improved performance
- Fixed scale value on the map screen
- Fixed "Wait" state of a DPOS task ("Checking Base data presence") even if the base file was downloaded
- Fixed bug related to configuration of ports in Base/Rover on Victor-LS

Since 2.0.5.667:
- Improved indication of Base IP.
- Base/Rover: fixed indication of radio's firmware version.

Since 2.0.5.659:
- improved logic related to leap seconds (using internal algorithm instead of GPS almanac to calculate the leap seconds)

Since 2.0.3.1894:
- Improved J-Tip support
- Improved Localization
- Improved DPOS:
- added Texas Network Support
- added EUREF network
- added possibility to select a Preferable Network
- added possibility to recover a DPOS session from the context menu of the "Points" screen
- Improved a Base point selection in the Base/Rover setup
- Improved "Points" screen
- added Speech to Text Recognition of the Audio Messages
- Improved Edit point screen
- Improved Cluster Average
- Improved Browse Files screen
- Improved Restore data from full backup: added "Profiles" option, allowed to restore profiles on another device
- Improved Export
- Improved Audio Recording
- Improved Map
- Improved Stake-Out
- Improved High Contrast Theme compatibility
- Removed the limit of 5 attributes per code
- Enabled by default screen multi touch support
- Improved Callibration Procedure
 

Jim Frame

Well-Known Member
Base cannot be started with firmware versions older than 3.6.8

This appears to have been fixed. I updated my LS today and successfully ran it via TCP from my old T2. I didn't look to see if there's new firmware for the T2, since it's too old to do the Base Guard thing anyway.

I haven't tried it with my UHF radio yet.
 

Matt Johnson

Well-Known Member
5PLS
J-Field 2.0.5.990 does not request the base gaurd data stream from Triumph-2s with boards less than version 4 so it does not matter what version of firmware you have with it.
 
Top