Duane Frymire
Active Member
I know this has been mentioned but can't seem to find it. What is procedure for using 2 LS from one triumph 2 base?
Thanks Adam!Start the base with LS 1 as normal
Connect to corrections with LS 2
Go to work
Go back to base with LS 1
Download base
Move base file from LS1 to LS 2 via files collected with points ( I like Dropbox for this)
In LS 2 points screen highlight any rover point Durning that session
Tap menu button
Tap recover base point
Tap menu
Tap attach gnss file
Tap menu
Tap recover dpos session
Bing Bam thank you mam!
This worked great, really productive. I didn't get PPK solutions on LS 2 though, should it give me ppk on LS 2? I DPOS LS 1 first, then moved base file to LS 2 and DPOS again after last step above recovering dpos session. Maybe I shouldn't DPOS on LS 1 before the copy?Start the base with LS 1 as normal
Connect to corrections with LS 2
Go to work
Go back to base with LS 1
Download base
Move base file from LS1 to LS 2 via files collected with points ( I like Dropbox for this)
In LS 2 points screen highlight any rover point Durning that session
Tap menu button
Tap recover base point
Tap menu
Tap attach gnss file
Tap menu
Tap recover dpos session
Bing Bam thank you mam!
Thanks Shawn. I had checked that screen to make sure I was doing base/rover and base/cors, didn't notice the check boxMake sure 2nd LS is set to process all points with raw data in the DPOS settings screen.
Thanks for the post Adam. Post like this highlight the need for a revised dynamic on-line users manual. I continue to post that we need a user manual that the user can easily update. There are so many great improvements since the last manual, however the existing manual is almost a negative because it is soooo outdated. In addition the way it is presently formatted there is no way to make changes that don't require a renumber of all of the pages. Please JAVAD; create a user manual that is:Start the base with LS 1 as normal
Connect to corrections with LS 2
Go to work
Go back to base with LS 1
Download base
Move base file from LS1 to LS 2 via files collected with points ( I like Dropbox for this)
In LS 2 points screen highlight any rover point Durning that session
Tap menu button
Tap recover base point
Tap menu
Tap attach gnss file
Tap menu
Tap recover dpos session
Bing Bam thank you mam!