It's a little rough around the edges as this was my first attempt. This video covers Base/Rover Setup from creating a rover profile, through all of the setup, up to the "Receiving" notification in base/rover setup and show a fixed solution at the rover. The next video will cover Stop and Download through VB-RTK/DPOS.
One thing I realized I neglected to mention. Base/Rover setup mandatorily causes the base receiver to store a raw data file. This is a good, because there are 2GB of storage in the Triumph-2, so there should be no concerns over memory. And if you don't want the file, it is easy to delete. If you do want the file, and forget to hit the record button, you can't get it back! So it's a good exercise. Currently, I select 30 second interval so that the file will be small (in other words, faster download and upload to DPOS/OPUS), and 30 seconds is fine for processing in DPOS or OPUS.
One thing I realized I neglected to mention. Base/Rover setup mandatorily causes the base receiver to store a raw data file. This is a good, because there are 2GB of storage in the Triumph-2, so there should be no concerns over memory. And if you don't want the file, it is easy to delete. If you do want the file, and forget to hit the record button, you can't get it back! So it's a good exercise. Currently, I select 30 second interval so that the file will be small (in other words, faster download and upload to DPOS/OPUS), and 30 seconds is fine for processing in DPOS or OPUS.