Battery Replacement - TLS

[briarcutter]

for the last few chargings of my LS+, the battery icon on the unit only indicates 50% charge after being on the charger overnight

I have three charging units and I have swapped them around to confirm it is not the chargers

will the LS+ need to be sent to the factory for battery replacement or is it something I can do ?

Paul

 

[JAVAD Support]

will the LS+ need to be sent to the factory for battery replacement or is it something I can do ?

For TLS 'internal battery and charging status' see



A customer can purchase a Triumph-LS/LS Plus Battery Replacement Kit, Part Number: 99-620101-01
There is a video online that shows how to change out the TLS internal batteries
- https://www.youtube.com/watch?v=Wy8YRQR5jzY
Also: observe ESD protection when handling the PCB electronic assemblies . . .

Alternatively: Please review post #1 of Return Material Authorization (RMA)
Send an email to support@javad.com requesting an RMA

 

[JAVAD Support]

will removing the batteries "reset" my settings/configuration on the LS+ ?

You can archive all projects and then create 'a Backup / Restore' ZIP file for the TLS unit.

Disconnecting and changing the internal battery pack will not erase any settings.