context navigation button

[Dale Adamson]

The light above the navigation button (-) has started flashing red green and yellow as the LS is booting up and then remains on "green". I used to push this button then the (+) button to turn on the collect screen, this does not work now. Any help with the (-) button would be appreciated.

 

[Javad]

The light above the navigation button (-) has started flashing red green and yellow as the LS is booting up and then remains on "green". I used to push this button then the (+) button to turn on the collect screen, this does not work now. Any help with the (-) button would be appreciated.

That LED flashing Red/Green/Yellow while booting is normal. It shows a stage of booting. The "-" and "+" was never intended to get you to the "Collect" screen. There are several easy ways to get to the Collect screen. One is the hardware button labeled "Collect". Or via Main/Action.

 

[Dale Adamson]

I use the collect button also to get to the collect screen, but I still have a problem as this light stays on all the time and after this happened I started having issues trying to stake a line by 2 points. I will be at it again today will let you know how it goes.

 

[Javad]

I use the collect button also to get to the collect screen, but I still have a problem as this light stays on all the time and after this happened I started having issues trying to stake a line by 2 points. I will be at it again today will let you know how it goes.

This light should stay green all the time. It shows all is normal. If during normal operation it rarely and temporarily blinks Red/Yellow/Green, it indicates rare and temporary processor overload.

 

[Dale Adamson]

Thanks
Dale