Create base & DPOS from file

Darren Clemons

Well-Known Member
We quite often use 2, sometimes 3, rovers on the same job running off one base.

If any of the "additional" rovers have PPK data, the easiest way I have found to process those is to copy the base file to a USB drive from "files/collected with points".

I then take that USB drive to my other rover(s) and use "points/additional actions/create base & DPOS from file"

The last 4 or 5 times I have done this, as soon as I select the point on the USB drive and click "open", the LS locks up.

It eventually shows the boot up screen but never fully reboots, it just freezes in that screen. I have to manually hold down the on/off button to do a reset.

Once it comes back on, the point I copied IS there and ready to DPOS and the process has worked but I can't feel like it is supposed to be locking the unit up every time I do this.

Could I possibly try "recover base point" or "recover DPOS session" first and THEN do the DPOS instead of doing both in the one action? Maybe it's "too much" and that is what's locking it up.


Darren
 

Adam

Well-Known Member
5PLS
Yes, you can do it in steps. Recover base point, attach base file, recover dpos session.
 
Top