Jim Frame
Well-Known Member
After running into some trouble getting a file to DPOS (problem since solved, thanks Shawn!) I decided to download the file via USB. I connected normally via NetView, but the download started very slowly and stalled. I tried a couple more times, but the farthest I got was about 20% of 13MB after 20 minutes or so.
I thought my firmware might be out of date; I have 3.6.0b3 dated May 21, 2014. I checked the website, and it says that 3.5.12 (November 12, 2015) is the current stable version, so I initiated an update. The update process seemed to go normally, but even after disconnecting and reconnecting, NetView still shows 3.6.0b3, and file transfers still get stuck.
Suggestions?
I thought my firmware might be out of date; I have 3.6.0b3 dated May 21, 2014. I checked the website, and it says that 3.5.12 (November 12, 2015) is the current stable version, so I initiated an update. The update process seemed to go normally, but even after disconnecting and reconnecting, NetView still shows 3.6.0b3, and file transfers still get stuck.
Suggestions?