DPOS Down?
- Thread starter Peter B
- Start date
You can check if DPOS is working by using the Customer Portal 'Data Upload' link - https://app.javad.com/jca/#/dpos/upload
Donald E Robinson
Active Member
DPOS is not working. It gets about 50% through processing and stops.
DPOS Post-Processing (in the US) will use the available CORS Rinex data on the NGS Server "at the time you upload your data" . . .
While many CORS 'reference data' are archived within 30-minutes past the hour, some aren't available until the next day (after Midnight UTC).
While many CORS 'reference data' are archived within 30-minutes past the hour, some aren't available until the next day (after Midnight UTC).
DPOS post-processing status August 11th, 2025:
o The DPOS Server has been 'reset' and 'restarted' and as of the time of this 'post' is fully operational.
o Sorry for the inconvenience to all of our Javad DPOS users.
o The DPOS Server has been 'reset' and 'restarted' and as of the time of this 'post' is fully operational.
o Sorry for the inconvenience to all of our Javad DPOS users.
avoidthelloyd
Active Member
Should we be able to DPOS after the top of the hour again like we used to? Has anyone checked lately?
Wait a day before submitting your file: DPOS will use the best NOAA CORS Network Station (NCN) RINEX data and orbits available at the time you upload your data.
While some NA CORS are archived within 30-minutes past the hour, most aren't available until the next day.
NGS / CORS data is now available
ken larson
Active Member
DPOS need a reset ...have not got it to work in a couple of days thanx
Mark Wheeler
Active Member
Ken,
Same in Massachusetts.
Mark
Same in Massachusetts.
Mark
1/11/2026:
Triumph-LS+ DPOS processing is working . . .
Triumph-LS+ DPOS processing is working . . .
Mark Wheeler
Active Member
Just ran Jan 9th DPOS file and it processed (1/11/2026 5:40 pm). On (1/10/2026 3:36 pm) it came back with "no cores available". Appears fixed now.
Mark
Mark
ken larson
Active Member
Thanx
During October, 2025 the Govt. Shutdown was occurring which closed all NGS/CORS data availability
Harold Dendy
Member
February 25, 2026 at 10:15 am, Central.
CORS processing stopped importing data at 40% for base station data collection ending at 5:00 pm yesterday.
Any ideas on what is going on?
CORS processing stopped importing data at 40% for base station data collection ending at 5:00 pm yesterday.
Any ideas on what is going on?
Kevin Wall
New Member
same here.
hopefully will be working soon.
we are returning to site and i plan to put base on #1 again, just call it #100 (day 2) so as to not have problems once dpos is working.
or do I set base on same #1 and tell it "known point"
will it dpos all points correctly?
hopefully will be working soon.
we are returning to site and i plan to put base on #1 again, just call it #100 (day 2) so as to not have problems once dpos is working.
or do I set base on same #1 and tell it "known point"
will it dpos all points correctly?
Running DPOS on a 'base' position from a week or so ago is working today
I have not tried with any 'base data' collected in the last 24hrs, sorry . . .
Hi Kevin, if you have an accurate known position for the base#1 then you can use "known point".
If the base is 'autonomous' then set the base#100 as such and DPOS (the 'base' and all 'rover' points) after the fact.