DPOS - Galileo, Glonass, GPS

James Suttles

Active Member
Just wondering if DPOS will process Galileo, Glonass and GPS once the Galileo constellation goes live in the release version of J-Field? Currently use LS Base and LS rover setup, so I would think it would collect the info, and hopefully DPOS will use it in a solution.
 

Aaron S

Active Member
DPOS has used Galileo for sometime now in base-rover processing, provided that raw data that includes Galileo is available for both the base and rover.

Does this mean that when my LS and T1-M are both tracking Galileo, it will use them in the DPOS solution, but not (yet) in an RTK solution? And if that's true: DPOS uses GPS, GLONASS, and Galileo, while OPUS uses GPS only? If so... Not too shabby!
 

Matt Johnson

Well-Known Member
5PLS
Currently only the Developer server has Galileo turned on. It can be selected in J-Field DPOS by choosing the DEBUG server and is also available online at https://dpos-dev.javad.com/jca/#/home. Galileo use was disabled in the Production server about 6 months ago because the use of Galileo was found to cause an incorrect solution in one case.
 

Mark Wheeler

Active Member
Matt, Can the LS alone collect a static point utilizing GPS L5 and Galileo that can be processed with a DPOS solution? Has the Galileo bug in DPOS been fixed and if so what is the site of the working version?
 
Top