DPOS - GPS ONLY

[Matt Johnson]

To clarify, it seems that the antenna model is only not written to jps files when data recording is started using the record on the Triumph-2. If you start data recording data with J-Field or with the Javad Mobile Tools app it should work correctly.

 

[Ron Booher]

These are the results, the .jps files are too big.

 

[Matt Johnson]

These are the results, the .jps files are too big.

I assume you started recording data with physical record button on the T2? See my post above.

 

[Shawn Billings]

These two reports are not for the same point. I'm not sure what your question is.

 

[Ron Booher]

Yes that is my question, when I used automatic choice for antennae the results were 0.01' of the total station field location vs 0.09' when choosing T2 antennae. I had to push the physical button, having hookup problems with IPAD.

 

[Shawn Billings]

It might help to see the reports from processing with the T2 antenna.

The main thing I look at is the Residuals of Position at the bottom of the report. These give the differences (in meters) between the individual CORS solution and the average position of all five solutions. If the numbers are low, then it means that the solutions had a good consistency. If they vary, it can mean the results are loose, maybe not wrong, but loose. In these two reports, the residuals are pretty good.