First Tests of Jfield 3

Kelly Bellis

ME PLS 2099
5PLS
RE: Jfield v.3.0.0.193

At the end of the hot day, shutting down the base, new warnings:

20180807-16.31.15_VKB_Setup_Base.png


20180807-16.31.46_VKB_Setup_Base.png




Why the need to repeat the warning about revision 3?

20180807-16.31.50_VKB_Setup_Base.png


20180807-16.32.01_VKB_Setup_Base.png



Lots to unpack:

1) The external radio behaved normally, so why the warning it is not paired?

2) Base Firmware complaint and to update to 3.6.12 or higher; however, my T2 is running 3.7.2

T2 Firmware.PNG

and for what it's worth I'm at this moment getting the latest unstable firmware for the Triumph-2 that's available; i.e., 3.7.3p1 Jun,21,2018.

3 and 4) I know my T2 is old, as I'm told several times in different places about this situation. But why keep harping on this? And why oh why, needs this message be repeated here in this list twice? The support of new features; is this limited to the only feature mentioned in Who Moved My Base? And for what it's worth, the radio going dark and staying dark is all that's really necessary to inform of mishap or mischief, and to avoid having to buy a replacement for the T2. Or are there other new features that my old T2 can't handle and that causes these continually nagging screens?

5) Data stream ordering error - what's up with this? What does this mean, and should I do something?

6) Can't read Base Point ID - Not sure what truth there is in this. The base file from the T2 to the LS was downloaded successfully in the field. It's integrity seems whole and intact. Comparing the file off of the T2 with the file off of the LS, both files are exactly the same size; i.e., 17,991,339 bytes.

7) Can't get files list - too vague to parse; pray tell more.
 

Kelly Bellis

ME PLS 2099
5PLS
Oh yea, and there was this other curious anomaly. Because the LS felt so hot to the touch when it came time to stop the base, I looked at the battery and took a screenshot:

20180807-15.02.42_VKB_Batteries_Status.png

Pretty weird - also noting the old naming style of this screenshot:
20180807-15.02.42_VKB_Batteries_Status.png
 

Matt Johnson

Well-Known Member
5PLS
It looks like there was some error when trying to communicate with the base. You don’t see all these messages everytime you stop the base do you?
 

Kelly Bellis

ME PLS 2099
5PLS
It looks like there was some error when trying to communicate with the base. You don’t see all these messages everytime you stop the base do you?

I've conducted one field test with Jfield 3 and this discussion is concerning that first field test which included these other test reports concerning not being able to find screenshots, etc.
 
Top