Floating

TonyC

Member
20220220-13.37.39_00992_COLLECT_GNSS.png


Any suggestions on what I am doing wrong here. I had 31 SV's and mostly wide open, on a beach (if you were wondering why I am at -1.5ft), waiting for a fix.
 

Michael Stazhkov

Developer
JAVAD GNSS
View attachment 12564

Any suggestions on what I am doing wrong here. I had 31 SV's and mostly wide open, on a beach (if you were wondering why I am at -1.5ft), waiting for a fix.
We need the raw GNSS data for analysis. Please, record GNSS data for a point, save the point for post-processing and send the project to support (Projects screen -> Send Project to Support). it is better to have a file duration of 5 - 10 minutes.
 

TonyC

Member
We need the raw GNSS data for analysis. Please, record GNSS data for a point, save the point for post-processing and send the project to support (Projects screen -> Send Project to Support). it is better to have a file duration of 5 - 10 minutes.
Would it be helpful to analyze the RTN stream from the base? I can set you up with a login and pswd. I have permanent 4 stations on Maui.
 

Michael Stazhkov

Developer
JAVAD GNSS
Would it be helpful to analyze the RTN stream from the base? I can set you up with a login and pswd. I have permanent 4 stations on Maui.
We are recording the rtn stream into the raw GNSS file. But you are right for analyzing of the base data we need 15 - 30 minutes of data. So please record at least 15 minutes file.
 

TonyC

Member
Going though the settings I noticed that the AFCL for Engines 1-4 was set to 99.9%. I reset it to Defaults (90%) for all engines and now it seems to be working a lot better. Is 90% okay for this setting?
 
Top