Nate The Surveyor
Well-Known Member
What's happening here, is my son is watching me. And, that is a hole in the Right of way tree row, and brush, that I cut out with a chain saw. You can see the cut off ends of the cedar tree, on your right side of the hole.
It is not a very good place to RTK, for a corner set. In my old days, I would set markers, on the line, and eyeball down the line, to set the corners.
This is a much closer view. Here, I have driven a 3/8" rebar in, and it is up about 8" and the LS is sitting on a Quick Release adapter, on top of that 3/8" rebar. I got 3 verified shots down low here. They were all within a tenth. I used this to set the W/C, on the R/W. This is actually on Salem AR job, that I posted elsewhere, recently. This is the corner, that is a WC to the NE corner of that survey.
I want to encourage others to "Get out of the box" and learn new tricks.
Mr Ashjaee I'm sure would approve!
Thank you,
Nate
It is not a very good place to RTK, for a corner set. In my old days, I would set markers, on the line, and eyeball down the line, to set the corners.
This is a much closer view. Here, I have driven a 3/8" rebar in, and it is up about 8" and the LS is sitting on a Quick Release adapter, on top of that 3/8" rebar. I got 3 verified shots down low here. They were all within a tenth. I used this to set the W/C, on the R/W. This is actually on Salem AR job, that I posted elsewhere, recently. This is the corner, that is a WC to the NE corner of that survey.
I want to encourage others to "Get out of the box" and learn new tricks.
Mr Ashjaee I'm sure would approve!
Thank you,
Nate