dgeoghagan
Daniel R. Geoghagan, PSM
I'm new to the Javad world, only having my Receivers for a few months now. I have a Triumph LS and Triumph 3. I have recently enabled the cellular modem on my Triumph LS for GSM and purchased a data plan from AT&T. I have the SIM card provided by AT&T inserted. The new OAF file was uploaded successfully. I attached a couple of photos from my TLS. I have the SIM card in slot 2 and turned on the 4G LTE Mini Card. The cellular Data On is greyed out and will not let me turn on. When I go to the GSM configuration screen as shown, says power is on, SIM2 is active, APN is broadband, and Network is Unregistered. I checked my AT&T subscription, and the SIM is active and registered. In the home screen, it shows 5 dots for the cell service signal, no bars at all. I know where I'm at has very good cell service for AT&T. Trying to figure out what's going on. Here are some questions I'm asking myself below. Maybe someone can chime in and help me solve my issue.
Is there something I need to set up in the Settings underneath SIM Card 2?
Is my subscription from AT&T not turned on even though it says it is?
Did I not upload the OAF file correctly?
Also, once I get this working for my TLS I want to do the same for my Triumph 3 (Base). Is the process the same with the T3? I want to use the cell service on both of my receivers to communicate and receive corrections. Once I solve these issues, is there a certain configuration I need to set up to get this working the receivers communicating through cell service? If so, can someone provide me with a configuration setup to get me going?
Is there something I need to set up in the Settings underneath SIM Card 2?
Is my subscription from AT&T not turned on even though it says it is?
Did I not upload the OAF file correctly?
Also, once I get this working for my TLS I want to do the same for my Triumph 3 (Base). Is the process the same with the T3? I want to use the cell service on both of my receivers to communicate and receive corrections. Once I solve these issues, is there a certain configuration I need to set up to get this working the receivers communicating through cell service? If so, can someone provide me with a configuration setup to get me going?