So i did a full backup, updated all to pre-release then did the migration today. Seemed to go ok. Did the restore but now very confused and stuck with no rtn.
I have J-field 3.0.8.424, GNSS 3.7.6.190416 Linux OS 4.4.190.11
I use smartnet and though I see the smartnet profile it does not appear to be setup properly.
Help! Been spending hours pressing buttons and I'm dead in the water
John
You may need to tap configuration and settings and enter the apn for the sim card. To use Rtpk trial you must be on the latest prerelease as Shawn said. The firmware version number really isn't important as long as you are using prerelease.Mitchell,
Previous post: thank you! I was able to recreate the RTN profile. I guess my problem now is with the Sim card settings. I did not change anything and I did a re-seat and cleaning of the card and port but still having issues with nothing showing up with the configuration screen. (It was all working well before I did the updates).
Last post: did I go too far with the update? Should it have been the 416 version?
John
You can always turn your hotspot on your phone. Configure the wifi to connect to it and the RTN will work off it.Found that and set it to cellular. Still not getting there. I'll try again tomorrow. Thank you
I changed it back to prelease 424 and the rtpk is back!You may need to tap configuration and settings and enter the apn for the sim card. To use Rtpk trial you must be on the latest prerelease as Shawn said. The firmware version number really isn't important as long as you are using prerelease.