Donald E Robinson
Active Member
I am still having trouble getting with my radio connection. I lose it at ±3,300 feet.
During the remote setup default setting is 30. I change it to 4000 and click next. If I go "Back" it is set at 30 again. I don't know if the correct setting is applied or not.
Is there any way to verify the radio is set for 4 watts (4000)
Also there is a new setting in Transmit Format "RTK-RTCM 3.0 MSM4" Should this be used?
During the remote setup default setting is 30. I change it to 4000 and click next. If I go "Back" it is set at 30 again. I don't know if the correct setting is applied or not.
Is there any way to verify the radio is set for 4 watts (4000)
Also there is a new setting in Transmit Format "RTK-RTCM 3.0 MSM4" Should this be used?