HPT435BT Radio Issues

[Mitchell D Lane]

Im having the same issues. Did this get resolved? Went to use base and cant connect external radio. LS/T2

 

[Brad Thompson]

Im having the same issues. Did this get resolved? Went to use base and cant connect external radio. LS/T2

I was told to just use the Pre-Release version. This seems to solve the issue with being able to communicate with the base/radio. There was an update that was sent out but it did not repair my issue. I had downloaded the repair in the office but when I was set up in the field it didn't work so I had to go back to the Pre-Release.

 

[John Rosco]

I've just checked the J-Field 4.0.1.665 with TR-3 Internal radio without any issue:

View attachment 13530

View attachment 13531

View attachment 13532

View attachment 13533

As I mentioned before, the NTRIP caster and UHF functionalities are unrelated. It seems you might be experiencing a different issue, possibly directly related to the internal UHF radio of the TR-3.

Hello All: Just to provide to you guidance in regards to UHF Channel Bandwidth settings for use in the USA for compliance to the FCC.
Do Not Use 25kHz setting in the USA, please use 12.5kHz.

 

[John Rosco]

I was told to just use the Pre-Release version. This seems to solve the issue with being able to communicate with the base/radio. There was an update that was sent out but it did not repair my issue. I had downloaded the repair in the office but when I was set up in the field it didn't work so I had to go back to the Pre-Release.

'Pairing' an 'External JAVAD radio-modem' to a Triumph 'base' (using JFIELD), via Bluetooth, is outlined in the attached 'guide' . . .

 

[John Rosco]

When using an older Triumph-LS system (IE: None Triumph-LS Plus), please ensure to use the 'Prerelease' JFIELD version 4.0.0.1216 in order to allow configuration of an External HPTxxxBT radio to a Triumph 'base' receiver . . .

 

[John Rosco]

'Pairing' an 'External JAVAD radio-modem' to a Triumph 'base' (using JFIELD), via Bluetooth, is outlined in the attached 'guide' . . .

Example of using JFIELD v4.0.1.665 with UHF Internal or External 'Paired' Triumph 'base' UHF Radio.
(The Triumph 'base' needs to have f/w v4.6.00 or above installed)

 

[Brad Thompson]

Example of using JFIELD v4.0.1.665 with UHF Internal or External 'Paired' Triumph 'base' UHF Radio:

Good Morning John,

Here is my screenshot while using v4.0.1.675:

 

[Brad Thompson]

Example of using JFIELD v4.0.1.665 with UHF Internal or External 'Paired' Triumph 'base' UHF Radio:

Here is my screenshots while using the prerelease v4.0.0.1216:

 

[Phillip Lancaster]

Connect to base. Right under the start base button click on the receiver name. Go to firmware and screenshot base firmware number. Long story short. It has to be 4.6 or its not going to work. I think that is your problem. LS is up to date. Base is not.

 

[JAVAD Support]

Connect to base. Right under the start base button click on the receiver name. Go to firmware and screenshot base firmware number. Long story short. It has to be 4.6 or its not going to work. I think that is your problem. LS is up to date. Base is not.