I just bought a used Triumph 1M...

[Jon Loder]

I just picked up a LS / BT435 / T-1M set for a pretty good deal. Everything seems to work as it should except the internal radio of the 1M. The external radio works great with it. (Bluetooth)
When I configure for internal, the UHF LED lights red while being configured and the goes out. I suspect that someone tried to use this without the antenna extension. I'm still hoping that there's a setting that isn't correct. Can someone point me in the direction of some instructions on making sure the configuration is correct?

 

[Phillip Lancaster]

Download Netview (4.7.0 or higher). Update options and latest firmware. Then try again.

 

[Jon Loder]

Download Netview (4.7.0 or higher). Update options and latest firmware. Then try again.

I've updated Netview as well as all of the firmware involved before I even started with this thing.

Jon

 

[JAVAD Support]

I've updated Netview as well as all of the firmware involved before I even started with this thing.

Jon

Looking at the internal UHF radio, there appears to be a UHF antenna problem at hand.



This could be as simple and needing a replacement T1M UHF/GSM antenna, or the problem is internal (to the T1M) UHF module . . .