I think my LS is maybe messed up

Nate The Surveyor

Well-Known Member
See this pic:
IMG_20200327_221330.jpg


The second group is the correct group. I knew the first group was bad, by the dist to last function. I had box taped it.
What's changed in the software?
It was a challenging spot!
N
 

Adam

Well-Known Member
5PLS
I dont understand. The spread between all the groups is less than the distance to last. How far off was it?
 

Adam

Well-Known Member
5PLS
I dont understand. The spread between all the groups is less than the distance to last. How far off was it? That's a lot of time n that shot for it to be wrong. Do you have pic of it?
 

Matthew D. Sibole

Well-Known Member
5PLS
I have seen something like this in the past but only 2 times in 5 years. It is like I tell people. It possible to get a bad fix to hold for more than 240 seconds but not probable. You found the possible one.
 

Nate The Surveyor

Well-Known Member
What it did, was soon after taking this pic, the second group took off, and finished out, and it was the right group. I have screen shots turned on, so I can post a pic of it. It'll be later, because I'm tied up. But, my minimum epoch count is set to 120.
N
 
Top