I'm having some kind of trouble with "Accept as"

Nate The Surveyor

Well-Known Member
20190617-12.06.53_00435_Inverse.png

Here we have a screen shot of an inverse screen. Inverse between Point number 576 SRV, to 576 DSN.
Now, that should NOT be happening. What it did, was I was staking a line, I told it "Accept as", and it was in AUTO ACCEPT, and AUTO RESTART.
I sort of think this contributed to the problem.

20190617-12.41.16_00435_Select_Point_Coordinates.png

When I went to LOOK and see the coords, the SURVEY point did not show up. However, the design point 576 did show up. And, in order to FIND the accept as point, I had to pick from a list, and in picking it from a list I got this screen.
Now the trouble is multiple here. Point 576, also has 577, and 578. These points were left out of the averaging. (of course, design points were not selected for averaging)
And, the "Accept as point VALUE is stored as a piggy back coord, to the Design point, (Which was NEVER made by me) but was MADE by J-field, and creates coords that are ON the line being staked.
Anyway, It seems like what happened here was "Auto Store" and "Auto Restart" allowed it to BYPASS the settings I desired.
Thank you,
Nate
 
Top