Importing points and lines

TonyC

Member
I don't recall if this was an issue prior to the pre-release update.
When I import points and lines they import in mirrored about the horizontal axis.

20220302-08.46.30_00992_COLLECT_MORE.png


When I do a single point localization, the map corrects itself.

20220302-10.50.54_00992_STAKE_OUT.png


The imported points and lines are generated with cad in their correct spatial orientation.
 

TonyC

Member
I have attached the point file and the cad file. You need to import it using a local coordinate system on the LS since everything in Hawaii is done on a local system. The second image is the correct orientation.
 

Attachments

  • 1350 Kaupakalua Road.txt
    3.1 KB · Views: 148

TonyC

Member
I can't seem to upload a dwg. Attached it the zipped file
 

Attachments

  • ACAD-1350 Kapakalua Road.zip
    185.9 KB · Views: 138

Michael Stazhkov

Developer
JAVAD GNSS
I have attached the point file and the cad file. You need to import it using a local coordinate system on the LS since everything in Hawaii is done on a local system. The second image is the correct orientation.
We need to know the coordinate system. Please send the project to support (Support -> Send Project to Support)
 

TonyC

Member
I just sent "289 Lakau Place" to support. The coordinate system is "Local". Here are the point file and dwg for this project.
 

Attachments

  • 289 Lakau Place.txt
    1.5 KB · Views: 138
  • ACAD-289 Lakau Place.zip
    176.7 KB · Views: 130

TonyC

Member
The update did not seem to resolve the issue. While the dwg comes in at the correct orientation using the "south azimuth" option, the points still come in mirrored.
It seems to be more of a visualization issue. When I import the points and lines, without using the "south azimuth" option, and then hover over the points in the map screen the coordinates are displayed correctly.
 
Top