J-Field 3.0.1.387 still freezing up...

Sdrake14

Active Member
All I see on the "send to support" on the LS is a "log file", I did this, I am assuming Micheal is looking for more....
 

DUANE WETMORE

New Member
My LS ser. # is 00723. Used it today for 4 hrs. with no freeze ups. Clicked DONE immediately after connecting to the base then did a SHIFT on an old control point.
 

Jim Campi

Active Member
This brings up an interesting point. If we upgrade to a version of J-field that seems to have bugs, it is possible to roll back to the last know good version?
 

Jim Campi

Active Member
I experienced my first system freeze in recent memory. Was working via the internal GSM radio connected to the CA Real Time Network. I turned off the cellular radio returned to the home screen and pushed off the off button (I had finished using the system for the day). The LS started the shutdown process and hung on the last screen before power down (Javad icon over a grey background). System was in this condition for some time and I held down the power button for about 10 seconds and the system powered off...
 

James Suttles

Active Member
Latest Pre Release states that the LS base unresponsive after rover looses connection has been fixed. The last two days, I have had to reboot the LS base right at 4 to 5 times a day. We are in thick vegetation thanks to spring and now summer temps, and TCP sometimes is loosing connection to the LS Base, when that happens for more than a few seconds, the base corrections stop being received even after the TCP connection is back up and stable. The only way to get correction after the loss of connection, is to restart the base. This is fairly easy if RAMS is on, yet I end up with multiple base files to DPOS. If RAMS for some reason is not on, or drops out of RAMS, then you have to physically go back to the base and restart it. The last two days the base has been a long way away, with a steep hike back to the truck, and then a drive over to the base, so you can see, kinda frustrating.

I know its being worked on, just giving an update that it appears it still has issues.
 
Top