J-Field 3.0.5.286, OS 4.4.190.4, GNSS 3.7.7.191225, JMate 0.0.1.669

[Greg Flowe]

I had to do a hard reboot after that happened to me and then it loaded with no problems. Jim is right about the restore point. Though I have found that if I only keep one restore point it will not have that problem. I am erasing the oldest one every time I update. So there will be one old one and one new one

 

[Ryan]

Click home button during boot up. Force new installation from settings
Sorry I'm away from the office I don't recall the exact option name.

That worked thanks.

 

[Javad]

We should make this easier. Zhenia, for your attention. We will discuss.

 

[Javad]

We will make this process transparent to user. May notify the user of the problem, but we do the corrective action. Stand by.

 

[Jim Frame]

View attachment 9572

What's the meaning of the gear icon in the compass/level box? I just noticed it today, and didn't see any mention of it in the manual update.

 

[Adam]

Long hold will remove the white boxes from the screen and a short tap will bring up the settings for the action profile.

 

[Jim Frame]

Long hold will remove the white boxes from the screen and a short tap will bring up the settings for the action profile.

Thanks!

 

[Adam]

You are welcome Jim

 

[Bill Eggers]

I never agree to the restore point, because it always kills the update.

Wish I had known this before I set restore point prior to update. I have nothing now.

 

[Ryan]

Bill, did the update hang on you and you lost your settings and data? If thats the case you should be able to restore back to the restore point that you made, in order to get back to where you were before attempting the update. Thats what I ended up doing.

 

[Bill Eggers]

The update seemed to work, but now I have no jobs and can't create a new one.

 

[Bill Eggers]

Did the restore but still the same problem, can't load project, can't create new project.

 

[Shawn Billings]

Is the project filter red? Probably all there, just hidden.