Nate The Surveyor
Well-Known Member
If I've got the parameters in front of me, it should take LESS than 30 seconds to key them in.
Rotate:
Old______ (can select by inverse between pnts)
New______brg or az
Pivot @________62
Points to rotate_______ S1 to S99, & S150 to S200
Or... Point groupings by name. That means point groupings remain intact, via group names. Groups can be edited.
Check box, always skip survey points.
Translate:
Group select, same as above.
PT___ = pt____
Also, add an align program, that combines both of the above. With check box, to allow scale to change or not.
The watch word here is simplicity.
I like to use rotate translate, to perform trial and error looks at things, in the field.
For the most part, it needs only to modify
DESIGN points.
As it is, I avoid it. Especially rotate.
Thank you.
Nate
Rotate:
Old______ (can select by inverse between pnts)
New______brg or az
Pivot @________62
Points to rotate_______ S1 to S99, & S150 to S200
Or... Point groupings by name. That means point groupings remain intact, via group names. Groups can be edited.
Check box, always skip survey points.
Translate:
Group select, same as above.
PT___ = pt____
Also, add an align program, that combines both of the above. With check box, to allow scale to change or not.
The watch word here is simplicity.
I like to use rotate translate, to perform trial and error looks at things, in the field.
For the most part, it needs only to modify
DESIGN points.
As it is, I avoid it. Especially rotate.
Thank you.
Nate