JMT Connection issues

I have been using the IOS version of JMT since I first received my T-2 6 years ago. I have had connection issues that have all been ironed out during that period.

I have just purchased a new iPhone 11 and JMT will not connect via WiFi. I have reviewed all of the default settings and I have cleared NV ram with NetView and Modem.

What do I have to get the iPhone 11 hooked up?

Ralph D.
 

Yuri Noyanov

Active Member
JAVAD GNSS
Dear Ralph,
Could you connect your Triumph-2 to desktop with NetView&Modem and check that latest firmware 3.7.9 installed and then select Actions | Setup WiFi AdHoc for iPhone/iPad connection.
 
Hi Yuri,
Thanks for the reply.
I had not checked the firmware and have now updated from 3.6.15 to 3.7.9. I applied the setup for WIFI adhoc for iPad/iPhone connection.

I can connect to the T-2 via WiFi settings in the iPhone. JMT Version 3.3 (build 3 20190716) reports the same as before: "Connection error!"

Other suggestions?
 
9939
 

Yuri Noyanov

Active Member
JAVAD GNSS
Everything is correct. And do you can connect your iPhone to this WiFi in Settings | Wifi ? And then click blue I icon near the wifi name to see assigned IP. Which IPs do you see?
 

Attachments

  • IMG_0208.PNG
    IMG_0208.PNG
    105.8 KB · Views: 276
  • IMG_0209.PNG
    IMG_0209.PNG
    67 KB · Views: 288
  • IMG_0210.PNG
    IMG_0210.PNG
    75.4 KB · Views: 294

Yuri Noyanov

Active Member
JAVAD GNSS
Ralph, I can't reproduce the issue. That's why I asked you attach screenshots from WiFi Settings of your iPhone. The same as I attached to above message. Could you do this?
 
Top