John Thompson
Well-Known Member
I am having trouble getting an RTK fixed solution with Javad Mobile Tools for Android.
I have a Triumph-LS and a Triumph-2 base that I connect via WiFi to a static IP address and send corrections via TCP. I recently bought a second T-2 to use as a second rover. I can control the T-2 rover with my data collector running SurvCE and get an RTK fixed solution. But I have to use my phone for a WiFi hotspot to get RTK corrections to the data collector, so I would like to eliminate the data collector and control the T-2 rover directly from my phone with JMT.
I set my T-2 base on a known point and start the base with the T-LS. The T-LS gets corrections and has RTK fixed solution. I connect to the rover T-2 with JMT and configure the RTK Rover. JMT shows the corrections are received, but no base distance and no RTK fix.
I tried clearing NVRAM on the T-2 rover. Didn't help. What am I doing wrong? Thanks.
I have a Triumph-LS and a Triumph-2 base that I connect via WiFi to a static IP address and send corrections via TCP. I recently bought a second T-2 to use as a second rover. I can control the T-2 rover with my data collector running SurvCE and get an RTK fixed solution. But I have to use my phone for a WiFi hotspot to get RTK corrections to the data collector, so I would like to eliminate the data collector and control the T-2 rover directly from my phone with JMT.
I set my T-2 base on a known point and start the base with the T-LS. The T-LS gets corrections and has RTK fixed solution. I connect to the rover T-2 with JMT and configure the RTK Rover. JMT shows the corrections are received, but no base distance and no RTK fix.
I tried clearing NVRAM on the T-2 rover. Didn't help. What am I doing wrong? Thanks.