JMT+T2 Tilt Compensation

Mitchell D Lane

Active Member
Trying to use JMT tilt compensation with the T2 and cant seem to get it working. What am I missing? I've used the LS tilt on house corners with great success but tried it with the JMT+T2 and can't get it to work. Is the T2 tilt compensation not as robust as the LS or is it JMT? I really would like the tilt compensation on the T2+JMT to like the LS does but not sure if that's possible. :(
 

Mitchell D Lane

Active Member
Yes to both. I couldn't get the compass to calibrate correctly in JMT so I used netview to calibrate the compass and the levels. I use the white box to turn on the tilt but have also turned it on in settings. The max angle is set to 45 which if I'm understanding it correctly would be plenty. I cant change the other angle. I've got the correct HR. The white box distance to last changes with the slightest movement even if the tilt is turn on and the same with stakeout.
 

Mitchell D Lane

Active Member
Screenshot_20201221-111003_JAVAD.jpg
 

LevDower

New Member
Hi...you can take a gander at the alignment yield from every pivot's going. Have you had a go at plotting the heading on every hub? This will advise you if your mag was aligned and if there's any delicate iron impacts or balances (hard iron). I found an instructional exercise utilizing the MPU9250 and how to adjust the AK8963 mag by turning around every pivot.
 
Top