LS is schizophrenic

LS will autonomously change screens In fact, as I am composing this message, it has progressed from the startup screen to the edit page screen with many stops between. The behavior is accompanied with a staccato run of audible clicks like the sound made when selecting on-screen item.
An example just occurred. The edit page screen has changed to the keyboard and is busily entering gibberish every few seconds.
In the field yesterday, the LS went berserk more than 6 times in an 8 hour period.
 

Eugene Aksyonov

Well-Known Member
Dear Michael,
can you please attach screen shot from "Home(page 2)"->"System"->"Versions".
Also check that you have no Warnings on LS related to LCD firmware upgrade.
Regards,
Eugene.
 
Screenshot attached.
 

Attachments

  • 0039_Versions_20150216-06.37.56.png
    0039_Versions_20150216-06.37.56.png
    27.8 KB · Views: 351

Eugene Aksyonov

Well-Known Member
Thanks Michael, LCD firmware update is NOT required !
Let us think a little to take decision is it RMA case or we can do something remotely.
 
5:43 p.m. PST: Unit has been idling for 20 minutes in the home screen. Began to run through screens and sounds like a geiger counter in Chernobyl. This behavior occurs on the desktop as well as the boondocks.
 

Matthew D. Sibole

Well-Known Member
5PLS
Eugene,
I spoke with Mr. Sprouffske earlier today and he explained what is happening. It sounds like there is an issue with the touch screen. He would like to know if a RMA is going to be issued or what he should do. His trial is almost up and needs to know what to do with it and what decision he needs to make as far as purchase goes.

Thank you
 
Top