LS monitoring device

Nate The Surveyor

Well-Known Member
How much trouble would it be to make an LS monitoring device?
Especially for running trajectory.
LS is up above your head. And there is a device called "LS monitor". It's got a light. That flashes just like the one on the LS. It's got a speaker, with volume. It can sit on the dashboard. Or, on the ATV / UTV.

In fact..... JERCY could do it. If it had ability to flash a light, and audio turned on.
We really need it, because often we should be watching where we are going, and it should change colors and sounds when we have not had a good shot in 2x the distance since we should have. (It's set to take a shot every 10 feet, and we've gone 20 feet).
Nate, the idea man.
 

Matt Johnson

Well-Known Member
5PLS
This already exists:


If you want audio, connect a Bluetooth headset.
 

Eric Tweet

Active Member
Don't feel too bad, Nate. I've yet to even successfully get sound out of a bluetooth headset (regardless of make/model). Not even button click sounds. I can "connect" a bluetooth headset no problem and all the device info shows up as expected, but no sound comes out of it.

If that's not funny enough, when I have "Allow Control The Device Via Bluetooth" turned on (for JERCI, RAMS, etc), connecting a bluetooth HEADSET causes the Support>Remote Assistance screen to show as though I'm connected to a server (i.e. the button at the bottom is red and shows "Disconnect")...
 

Matt Johnson

Well-Known Member
5PLS
But during trajectory, I have not yet figured out how to turn sound on. You imply that sound is on there.
N


COLLECT_EVENT_TONES_20211110-08.54.24.png



Do you have the tone for trajectory coordinates enabled?

I've yet to even successfully get sound out of a bluetooth headset (regardless of make/model). Not even button click sounds.
This may not be working right now. I tried a Bluetooth speaker and did not get any sound out of it.
 
Top