LS vertical Issue

Jeremy Hutchins

New Member
I have noticed on a few seperate jobs that the LS is around 0.15' to 0.20' different than the vertical between my robot. I know the base is not the problem as I have checked to other GNSS points and had good checks. If I remember correctly this was discussed in a previous thread but I am not able to find it. Any advice?
 

Adam Plumley

Active Member
JAVAD GNSS
First thing is to look at your screenshots and make sure the rod height and offset values are correct.
 

Jeremy Hutchins

New Member
They are correct on my screen shots. Measure up to the arrow on the side of the LS. Now, I due use the Vertical offset height to adjust the difference between my rod reading and true height, I am assuming this is what the feature is for?
 

Jeremy Hutchins

New Member
The LS is consistently lower than my base. I am always having to adjust the LS verticals up. I am measuring to the arrow on the bottom of the LS.
 
Top