Bruce Dawson
Active Member
No, that's the weird thing. I connect up to it, and look under Manage Files. Only 2 files, neither with the correct date.
Major shift in DPOS processing
- Thread starter Bruce Dawson
- Start date
Also did you change projects anytime between starting and stopping the base?
Bruce Dawson
Active Member
No, started up and let it run. I will say that I had problems getting rover fixes, but it was a pretty heavily treed area with tall pines. Only got one shot before I punted and pulled out the total station.
You should have many files on the T-2 if you have never deleted them. You can view deleted files by connecting it to Netview and select Greis Commands>Capture and then send the command:
%%set,/par/dev/blk/a/removed,on
%%set,/par/dev/blk/a/removed,on
Bruce Dawson
Active Member
I did delete files off the T-2 prior to this job, Mark, so only having 2 is not surprising. What I am surprised at is that my work on 3-13 appears to be gone. The 2 files left on the T-2 are from 2-21 and 2-27, two different jobs. Both were down in the area that DPOS is putting my coordinates at now, so that scenario checks out.
I know I started the job correctly, and that I downloaded it at the end of the day. It was a 5 hour setup and the download took several minutes. I don't know what became of it. It's a mystery to me. Luckily I didn't need the data.
I know I started the job correctly, and that I downloaded it at the end of the day. It was a 5 hour setup and the download took several minutes. I don't know what became of it. It's a mystery to me. Luckily I didn't need the data.